LumberJocks

alabaster VII

  • Advertise with us
Project by Ronald G Campbell posted 07-11-2013 12:07 AM 1075 views 2 times favorited 14 comments Add to Favorites Watch

Alabaster with 2 part epoxy rim. Approx 5 inches across the top. Lacquer finish

-- Ron Campbell https://www.facebook.com/ronald.g.campbell





14 comments so far

View JR_Dog's profile

JR_Dog

526 posts in 1717 days


#1 posted 07-11-2013 12:32 AM

Really beautiful bowl! Do you use a round carbide tip for these or a combo of diff blades?

View Ronald G Campbell 's profile

Ronald G Campbell

864 posts in 1401 days


#2 posted 07-11-2013 12:33 AM

I used only round carbide. It cuts the best and allows me to make the curves easily

-- Ron Campbell https://www.facebook.com/ronald.g.campbell

View peteg's profile

peteg

3787 posts in 2220 days


#3 posted 07-11-2013 01:35 AM

You’re doing some real nice work right now Ron, 2 lovely pieces these last 2 posts
Pete

-- Pete G: If you always do what you always did you'll always get what you always got

View SnowyRiver's profile

SnowyRiver

51452 posts in 2878 days


#4 posted 07-11-2013 01:44 AM

Beautiful work…very nice.

-- Wayne - Plymouth MN

View Roger's profile

Roger

19601 posts in 2201 days


#5 posted 07-11-2013 01:51 AM

Wow! That looks like glass

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View Roger's profile

Roger

19601 posts in 2201 days


#6 posted 07-11-2013 01:54 AM

whoops

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View Jim Jakosh's profile

Jim Jakosh

16622 posts in 2503 days


#7 posted 07-11-2013 02:17 AM

Wow, what an elegant piece! Nice going , Ron!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View tomd's profile

tomd

2009 posts in 3167 days


#8 posted 07-11-2013 02:31 AM

Very nice piece, looks terrific.

-- Tom D

View aussiedave's profile

aussiedave

3114 posts in 1221 days


#9 posted 07-11-2013 03:08 AM

Another great looking bowl Ron….always a pleasure to see your work…

-- Dave.......If at first you don’t succeed redefine success....

View michelletwo's profile

michelletwo

2572 posts in 2413 days


#10 posted 07-11-2013 10:04 AM

what a finish..the dyed epoxy rim is an interesting addition..looks good.

View CharlieM1958's profile

CharlieM1958

16228 posts in 3615 days


#11 posted 07-11-2013 03:23 PM

That’s drop-dead gorgeous, Ron.

-- Charlie M. "Woodworking - patience = firewood"

View Ronald G Campbell 's profile

Ronald G Campbell

864 posts in 1401 days


#12 posted 07-11-2013 11:23 PM

I did the dyed rim of epoxy as I was afraid of chip out with the alabaster.

-- Ron Campbell https://www.facebook.com/ronald.g.campbell

View Schwieb's profile

Schwieb

1791 posts in 2858 days


#13 posted 07-12-2013 02:37 PM

Gorgeous turning

-- Dr. Ken, Florida - Durch harte arbeit werden Träume wahr.

View Fishinbo's profile

Fishinbo

11362 posts in 1573 days


#14 posted 07-15-2013 01:34 PM

Awesome bowl! Great shape and finish. The epoxy rim is a great addition. Outstanding work!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com