LumberJocks

Cherry end table

  • Advertise with us
Project by Mark posted 07-05-2013 05:07 PM 632 views 2 times favorited 2 comments Add to Favorites Watch

I finally finished my end table. All solid cherry. The top is glued up 4/4X3 1/2X25” boards. After the clamps came of I planed it flat with a #5 Stanley and a 9” block plane (the more planing I do the more I enjoy it). I used Walnut fort the leg inserts, spindles and the top trim. For the trim I ripped 2 pcs of 4×4X 1/16 and used a cargo clamp to secure it one strip at a time. i staggered the joints on the strip by an inch or 2. I finished it with 1 coat of “teak oil” (BLO & thinner)and 5 coats of water based Varithan with 220g paper in between. I used 0000 steel wool and furniture polish after the last coat. It was a fun project and the Mrs. is quit pleased :). Thanks fer lookin’
Mark

-- Mark





2 comments so far

View aussiedave's profile

aussiedave

3014 posts in 572 days


#1 posted 07-06-2013 12:15 AM

Beautiful end table….nice style and finish…well done.

-- Dave.......Keep calm and make more sawdust....

View Fishinbo's profile

Fishinbo

11343 posts in 923 days


#2 posted 07-09-2013 02:08 PM

Very pretty end table. Like the Cherry and the design as well as the finish. Happy wife means happy life. Great job!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase