or Join Now!
Made for ksSlim for the gauge swap. Woods are Padauk and Walnut. Finish is tung oil and wax.
-- Mark Kornell, Kornell Wood Design
home | projects | blog
796 posts in 1373 days
Preview this project card
5590 posts in 1441 days
#1 posted 07-04-2013 09:48 PM
Rrally nice one here. The knob and blade are great details.
2973 posts in 1053 days
#2 posted 07-04-2013 10:00 PM
Great job, Mark. What did you use for the blade?
-- "My concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right." Abraham Lincoln
2309 posts in 1094 days
#3 posted 07-04-2013 10:06 PM
Another nice one from the swap! I like the offset beam and the notch on the fence. Mighty fine work!
-- People say I hammer like lightning. It's not that I'm fast -- it's that I never hit the same place twice!
16017 posts in 1410 days
#4 posted 07-04-2013 11:12 PM
-- Master hand plane hoarder. - http://timetestedtools.com
#5 posted 07-05-2013 12:31 AM
The blade is a triangular carbide lathe cutter. I ground one point to a knife-like edge to make it usable. Should stay sharp for a long time!
4145 posts in 1794 days
#6 posted 07-05-2013 03:24 AM
Wonderful work! That knob is my favorite!
-- "hold fast to that which is good"
15407 posts in 2031 days
#7 posted 07-05-2013 01:25 PM
I like it, Better than buying one for sure.
-- Ken, "Everyday above ground is a good day!"
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics