or Join Now!
I’ve just added this project to my previous post regarding my “discovery” of the MUSCLECHUCK. this is a link to the thread
-- Harry, Western Australia
home | projects | blog
509 posts in 749 days
Preview this project card
1719 posts in 1533 days
#1 posted 257 days ago
When you posted this project, you had to click on the agreement below:
“Yes, I want to post my finished project that is made of wood If it doesn’t fit the above description (like tool gloats & upgrades, wood gloats, projects in progress etc.),
either blog it or post it in an appropriate forum. Otherwise it will be removed. “
I would think this would make a fantastic blog, but it really doesn’t belong here, does it?
-- Robert Rhoades WoodWorks / Email: email@example.com / www.rhoadesclan.com
#2 posted 257 days ago
The link above shows the project made from WOOD! Prior to that it was the preamble before the project proper but all part of the same thread. There are heaps of “projects” on this forum by many well respected members that do not contain ANY WOOD.
3762 posts in 756 days
#3 posted 257 days ago
Could you be more specific about what part or portion of this project is made from wood? Frankly, the only wood I see is what appears to be a partical board surface and the edge of three boards in the background. Everyone gave you a pass on your original post and I even ordered a Musclechuck earlier this week, but absent such clarification on actual wood usage in your current project, it would appear you are just pushing the boundaries and KnotCruser is 100% correct.
P.S. The link you reference as being above is to your original project post which also lacks any wood.
-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington
1807 posts in 1152 days
#4 posted 257 days ago
What was the project?
-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions - http://www.steliart.com --
913 posts in 1256 days
#5 posted 257 days ago
+two for Bob’s post at #1.Rules are rules, and this one is easily followed. The advice to start a blog is sound advice.
-- Mel, Nothing say's "I am a ignorant hick" more than a bogus quote of a founding father in your signature line.
#6 posted 256 days ago
I didn’t mean to set you off. I was very politely pointing out that there are rules for posting projects – rules every one of us obey and agree to every time we post a project.
Saying others disobey the rules certainly doesn’t make what you did Okay, does it?
I just don’t want people to start posting their vacation pictures or pics of their kid’s birthday parties – we have FaceBook for that.
No hard feelings, Okay?
11579 posts in 2152 days
#7 posted 256 days ago
You guys are wasting your breath on Harry. He didn’t get it the first time and most likely won’t comprehend it this time either.
-- When you arrive at my front door, please knock softly but firmly. I like soft , firm, knockers : )
912 posts in 779 days
#8 posted 256 days ago
-- Grumpy old guy, and lookin' good Doin' it.
#9 posted 256 days ago
At the top of this post is this link which takes you to my original thread where I have added a link to the project proper which is made from SOLID WOOD. It is in the 55th post of the original project. Unlike LJ’s sister forum routerforums.com where it is possible to post pdf’s, here they have to be posted off-site in Google Docs, a very messy system.I’m still so excited about the MUSCLECHUCK that I consider it should have maximum exposure, every single member who uses a router should be made aware of it’s existence, how can you disagree with that. At age 80 in a few months I’m not out for any sort of personal glory, those days are well passed, my aim these days is to pass on my knowledge of routing to as many people as possible. So little has been written about plunge routing, template making and ski routing compared to table use that I must use what ever means works best/fastest.
#10 posted 256 days ago
In fairness to Harry, there is a wood project at the end of his references, at the end of his 13 page article, to-wit:
On another note, I received the Musclechuck that I ordered Monday in today’s mail. I look forward to playing with in the near future, so thanks to Harry.
405 posts in 532 days
#11 posted 256 days ago
-- Art, Pittsburgh.
18940 posts in 2315 days
#12 posted 256 days ago
Thanks Harry. You are making me envious
-- Grumpy - "Always look on the bright side of life"- Monty Python
#13 posted 256 days ago
JOHN, thank you, thank you, thank you, I was starting to feel like an outcast. Thank you also fellow members for all you’re positive feedback. I now have another “new” wonderful product called the GRR-RIPPER which is, in my humble opinion far superior to all previous pushers that I have come across in my lifetime, it brings SAFETY to the bench saw, band saw, router table and jointer. Because there will be no project in the thread, only some photographs, I will be posting it in the REVIEWS section, which will be the correct place for it!
6835 posts in 1819 days
#14 posted 256 days ago
Looking forward to the REVIEW…
-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...
#15 posted 256 days ago
John, I’m looking forward to seeing if, when you’ve done some routing with the MUSCLECHUCK especially with multiple bit changes, you become anywhere near as excited as I am. I hope that you will make the post on this thread where I’m certain that there are many members eagerly awaiting your thoughts.
View all comments »
showing 1 through 15 of 33 comments
Go to Pulse page »
©2005-2014 Escalatemedia.com. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics
Latest Projects |
Latest Blog Entries |
Latest Forum Topics