LumberJocks

Walnut Vase

  • Advertise with us
Project by Ronald G Campbell posted 06-17-2013 02:28 AM 840 views 0 times favorited 10 comments Add to Favorites Watch

Walnut vase turned and fluted. Turned on the new Carter Hollow Roller Xl Approx 23 inches tall.

-- Ron Campbell https://www.facebook.com/ronald.g.campbell





10 comments so far

View Bob Collins's profile

Bob Collins

2320 posts in 3147 days


#1 posted 06-17-2013 03:23 AM

Real nice Ron, nice wood and nice finish. Must look up that Carter Hollower.

-- Bob C, Australia. I love sharing as long as it is not my tools

View doubleDD's profile

doubleDD

5230 posts in 1507 days


#2 posted 06-17-2013 03:45 AM

Beautiful job Ron. Also will add, the Carter Hollower is a great addition to turning.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View peteg's profile

peteg

3857 posts in 2287 days


#3 posted 06-17-2013 07:06 AM

That is one TALL slender vase Ron, beautiful piece of walnut for the job, very nice indeed :)
pete

-- Pete G: If you always do what you always did you'll always get what you always got

View stefang's profile

stefang

15512 posts in 2798 days


#4 posted 06-17-2013 08:04 AM

Unique design and beautiful turning work.

-- Mike, an American living in Norway.

View aussiedave's profile

aussiedave

3114 posts in 1288 days


#5 posted 06-17-2013 10:00 AM

Another beautiful vase Ron…always a pleasure to see your work. Did you make a router jig or something to make those long grooves up the side of the vase….it looks really nice.

-- Dave.......If at first you don’t succeed redefine success....

View michelletwo's profile

michelletwo

2594 posts in 2479 days


#6 posted 06-17-2013 10:33 AM

great vase. I saw it over on WTU, but I have connectivity issues there & could not comment. I’m glad you posted a picture next to a chair, as it gives a great idea on how deep you hollowed. Super job.

View Ronald G Campbell 's profile

Ronald G Campbell

891 posts in 1468 days


#7 posted 06-17-2013 11:34 AM

Dave yes I made a router table and router sled to be able to flute the sides of the vase. Now if I could only visualize how Michelletwo does her platter I would be happy.. Thanks guys for all the comments. The Hollow Roller Xl will be at the AAW and I will be working the booth too. Stop by and see me.

-- Ron Campbell https://www.facebook.com/ronald.g.campbell

View HorizontalMike's profile

HorizontalMike

7147 posts in 2378 days


#8 posted 06-17-2013 01:51 PM

Very attractive!

-- HorizontalMike -- "Woodpeckers understand..."

View hairy's profile

hairy

2384 posts in 2996 days


#9 posted 07-08-2013 02:07 PM

Great job! I have looked into the Carter Hollow roller, so far I have talked myself out of it twice. I have watched their video, and other video reviews about it, and got the impression it would only go 9 – 10 inches deep. Did you kick it up a notch, or is it right out of the box that deep? Keep up the good work. Thanks!!

-- stay thirsty my friends...

View Ronald G Campbell 's profile

Ronald G Campbell

891 posts in 1468 days


#10 posted 11-29-2013 02:39 AM

Yes this was done with the Carter Hollow Roller Xl. It is much bigger than the standard Hollow Roller. With the Standard hollow Roller you can only go about 13 inches. This is almost 23 inches. You can go as deep as 30 inches with the Hollow Roller Xl

-- Ron Campbell https://www.facebook.com/ronald.g.campbell

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com