or Join Now!
Made these serving tray with a hole for the wine glass.
-- Gerry (the beginner), Gatineau, QC, Canada
home | projects | blog
186 posts in 2231 days
Preview this project card
1875 posts in 2004 days
#1 posted 06-16-2013 04:30 PM
A nice idea and a good work
What type of finish did you use ?
Thanks for sharing
-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit
#2 posted 06-16-2013 07:20 PM
mineral oil and board butter (bees wax and mineral oil)
425 posts in 2012 days
#3 posted 06-17-2013 03:36 AM
very nice. what size is the hole, opening. is there a recess in the back for the base of the glass?. thanks
-- wiser1934, new york
#4 posted 06-17-2013 11:35 AM
used 35MM FORSTNER EURO HIDDEN DOOR HINGE DRILL BORING BIT for the hole, then I routed all the edges (both sides) of the board and hole and groove with a 1-1/4” x 5/8” x 1/2” Corner Round Over Bit . No recess in the back.
116 posts in 1643 days
#5 posted 06-17-2013 08:38 PM
What is it’s function?
-- Al Carscadden, Panga Design, http://www.pangadesign.com firstname.lastname@example.org
#6 posted 06-17-2013 09:44 PM
cocktail time, standing party, pool party, bed party, etc. just add cheese crakers, etc, and your favorite glass of wine
11362 posts in 1040 days
#7 posted 06-19-2013 02:51 PM
Cool serving tray! Like the wood color combo and the hole. Well done!
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics