|Project by steliart||posted 06-14-2013 01:45 AM||44447 views||64 times favorited||15 comments|
Kreg Jig Work Platform
Since the Kreg jig system uses its own screws, drill bits, drivers, plugs etc.. a dedicated work platform with storage is a good idea.
Here is how I choose to build mine:
The Jig is stationery in the center of the station and for the platform I used a piece of hardwood deck which is very straight with a smooth surface.
Both sides can be lifted to access the compartments which are divided in small/big boxes according to what you want to store in them.
The platforms are secured with hooks to keep them flash and level with the jig, and finally the station base is longer than the platform to allow the use of clamps if needed.
-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions - http://www.steliart.com --