LumberJocks

Diamond Cutting board 2 End grain

  • Advertise with us
Project by Scott Oldre posted 05-19-2013 02:08 PM 2386 views 29 times favorited 19 comments Add to Favorites Watch

2nd Diamond pattern end grain cutting board for another neighbor. Maple main, Walnut accent sides and diamonds. Smaller diamonds than the previous board. Ambrosia maple hand turned feet. smoothered in mineral oil cuz they all say they’re going to use them, yet I know a few just can’t bring themselves to cut on them. I sand all my boards to 400, and resand after a week or two as the wood settles and the gluelines sometimes show up between the contrasting wood. Then I cut and install the feet and finish the bottoms.

Hope you like.

-- Scott, Irmo SC





19 comments so far

View tomakazi's profile

tomakazi

682 posts in 2254 days


#1 posted 05-19-2013 02:15 PM

Very cool!! what a great idea!!

-- I didn't go to college, I was too busy learning stuff - Ted Nugent

View a1Jim's profile

a1Jim

113456 posts in 2548 days


#2 posted 05-19-2013 02:17 PM

Very cool ,super details.

-- http://artisticwoodstudio.com Custom furniture

View waho6o9's profile

waho6o9

6131 posts in 1548 days


#3 posted 05-19-2013 02:32 PM

Very nice cutting boards.

View JL7's profile

JL7

8002 posts in 1936 days


#4 posted 05-19-2013 03:56 PM

That’s a real beauty…..nicely done.

-- Jeff - I have not failed. I've just found 10,002 ways that won't work.

View stefang's profile

stefang

14556 posts in 2305 days


#5 posted 05-19-2013 04:26 PM

Another really good looking board.

-- Mike, an American living in Norway.

View SteveGaskins's profile

SteveGaskins

394 posts in 1558 days


#6 posted 05-19-2013 05:19 PM

Love it. Nice build.

-- Steve, South Carolina, http://www.finewoodworkingofsc.com

View blackcherry's profile

blackcherry

3224 posts in 2794 days


#7 posted 05-19-2013 07:11 PM

Very COOL Design!

View Dusty56's profile

Dusty56

11776 posts in 2659 days


#8 posted 05-19-2013 07:41 PM

They’re both gorgeous looking boards ! Love the turnings as well : )

-- I'm absolutely positive that I couldn't be more uncertain!

View sras's profile

sras

4159 posts in 2100 days


#9 posted 05-19-2013 08:32 PM

Wow – those small details take extra attention to pull of. Nice job!

-- Steve - Impatience is Expensive

View SPalm's profile

SPalm

5151 posts in 2853 days


#10 posted 05-19-2013 11:25 PM

Sweet boards Scott.
I love all the little bits too that make it a wonderful board.

Good for you for waiting a while and then re-sanding. I have washed boards in soap and water too, it helps raise the grain real good before the re-sand.

Great job,
Steve

-- -- I'm no rocket surgeon

View todd 's profile

todd

29 posts in 965 days


#11 posted 05-20-2013 12:38 AM

great looking boards, love them

View Greg D's profile

Greg D

200 posts in 922 days


#12 posted 05-20-2013 04:56 AM

Nice job Scott! Like it a lot!

-- Greg D, Cen. CA, "Keep it on the Level, Do it Right the First Time!"

View CalgaryGeoff's profile

CalgaryGeoff

937 posts in 1453 days


#13 posted 05-20-2013 07:02 AM

Looks great, like the size of both and the idea to wait awhile between final sanding. I stop at 320 grit and raise the wood grain with a wet sponge once and sand with 320 again.

-- If you believe you can or can not do a thing, you are correct.

View prattman's profile

prattman

440 posts in 1088 days


#14 posted 05-20-2013 09:29 AM

Beautiful boards !!!!

-- Everyone calls me Ed or Eddie , mom still calls me Edward if she is mad at me.

View pmelchman's profile

pmelchman

84 posts in 2124 days


#15 posted 05-20-2013 12:38 PM

very very nice…..

-- Patrick https://www.facebook.com/dragonflywoodworking

showing 1 through 15 of 19 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com