LumberJocks

Table saw tables

  • Advertise with us
Project by Airspeed posted 05-19-2013 02:35 AM 2721 views 6 times favorited 10 comments Add to Favorites Watch

I decided to rebuild my side and outfeed tables on my saw, I also added a small fold down table for a little extra space when I need it. I made up a couple of fold down/telescoping legs that fit into a couple slots at the base of the cabinet. It folds up and down easily.

-- http://smg.photobucket.com/albums/v655/aaronhero/





10 comments so far

View jeff's profile

jeff

1035 posts in 3005 days


#1 posted 05-19-2013 03:48 AM

Nice project…

-- Jeff,Tucson,Az.

View whitebeast88's profile

whitebeast88

4111 posts in 1730 days


#2 posted 05-19-2013 04:02 AM

excellent job that sure will come in handy…

-- Marty.Athens,AL

View DIYaholic's profile

DIYaholic

19270 posts in 2215 days


#3 posted 05-19-2013 04:12 AM

Lots of useful horizontal surfaces, that’s for sure. Nicely done.

Wanna come over to my shop and walk me through the build???

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View Airspeed's profile

Airspeed

431 posts in 1442 days


#4 posted 05-19-2013 04:19 AM

Thanks! I’ve been climbing in, over, around and under crap in my shop for years and years! I just couldn’t take it anymore! Tomorrow I start all new cabinets to hold every tool I own. I’m sure I spent half my time in my shop just making room. This should greatly improve my shop time. Thanks again!

-- http://smg.photobucket.com/albums/v655/aaronhero/

View JL7's profile

JL7

8510 posts in 2505 days


#5 posted 05-19-2013 04:21 AM

Very nice Aaron…..that’s a lot of real estate…..Just beware the junk that is bound for those nice new surfaces!! Sorry, it’s inevitable…...I know first hand :)

-- Jeff .... Minnesota, USA

View NormG's profile

NormG

5619 posts in 2544 days


#6 posted 05-19-2013 04:57 AM

Great tables, I wish I had the space for some, even one would be great

-- Norman - I never never make a mistake, I just change the design.

View boxcarmarty's profile

boxcarmarty

13982 posts in 1900 days


#7 posted 05-19-2013 11:34 AM

I know what ya mean on the making room part Aaron. Here lately my workbench has spilled out the door and onto the tailgate of my pickup. Sweet job on the extensions…..

-- My mind is like lighting, one brilliant flash, then its gone.....

View Robsshop's profile

Robsshop

899 posts in 2515 days


#8 posted 05-19-2013 02:45 PM

That’s a nice looking set up Airspeed! Looks like You could land a plane on there if you had to ! ;-)

-- Rob,Gaithersburg,MD,One mans trash is another mans wood shop treasure ! ;-)

View eddie's profile

eddie

8518 posts in 2154 days


#9 posted 05-19-2013 05:42 PM

sweet Aaron, all that flat area its going to be a all around work area

-- Jesus Is Alright with me

View Les Hastings's profile

Les Hastings

1300 posts in 3313 days


#10 posted 05-20-2013 01:02 AM

Great idea! Makes for a lot of work surface.

-- Les, Wichita, Ks. (I'd rather be covered in saw dust!)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com