|Project by bd187||posted 05-17-2013 02:09 AM||1018 views||0 times favorited||1 comment|
Just wanted to try my hand at building a crosscut sled for my tablesaw. Absolutely nothing fancy here. I used the 5 cut method to square it up. But i made one mistake. After square the front fence i ran the blade through before screwing in the base on either side of the cut. so now, although the fence is square, the right side base is elevated slightly so you can’t slide a workpiece across the kerf without it catching on the opposite side. You have to lft it up. It’ll work for now, but i know i’m gonna build a better model
-- Never bite the hand that feeds you, but always watch the hand that's cooking.