LumberJocks

Homemade Router Table

  • Advertise with us
Project by dubgregory posted 425 days ago 2682 views 8 times favorited 7 comments Add to Favorites Watch

This is my homemade router table made out of 3/4” plywood. Attached is my Ridgid fixed base. Top has cut out for T-handle wrench to make above table depth adjustments. Top also has miter guide and pulls up to insert or remove router. Fence has dust collection port, featherboard guard, and attached rockler fence clamps.





7 comments so far

View whitebeast88's profile

whitebeast88

3382 posts in 774 days


#1 posted 425 days ago

very nice,great build.

-- Marty.Athens,AL

View Sanding2day's profile

Sanding2day

918 posts in 430 days


#2 posted 425 days ago

Nice setup… Thanks for sharing…

-- Dan

View Jim Jakosh's profile

Jim Jakosh

10951 posts in 1689 days


#3 posted 425 days ago

Nice handy router table. You have incorporated some nice features in it!!..............Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View NiteWalker's profile

NiteWalker

2631 posts in 1160 days


#4 posted 425 days ago

Great job. It’ll serve you well.

-- He who dies with the most tools... dies with the emptiest wallet.

View The Box Whisperer's profile

The Box Whisperer

505 posts in 654 days


#5 posted 424 days ago

I like it, well done. Clever way of adding on board wrench storage. My router table is very similar in shape, and I can almost feel myself reaching for that wrench right now…I also have the same router, I have no doubt this table will work well.

-- "despite you best efforts and your confidence that your smarter and faster than a saw blade at 10k rpm…. your not …." - Charles Neil

View Amoc's profile

Amoc

35 posts in 548 days


#6 posted 400 days ago

I am getting ready to build a router table. I built a large one that after I had it for a while I ofund that being too big is just as bad as being too small. After having this table for a while are you still happy with it?

-- Ken from Ft Hood, TX

View dubgregory's profile

dubgregory

20 posts in 1609 days


#7 posted 391 days ago

Hi Ken yes still getting a log of great use out of it. Been a good size for all my needs so far. I agree, my next router table top will probably be just a little bigger, but not much.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase