or Join Now!
Couple of recently completed boxes. 1st is walnut sides with curly maple with a couple ambrosia streaks. 2nd is all cherry with removeable lid. Clear Watco finish with Beall system wax
home | projects | blog
86 posts in 2143 days
Preview this project card
1001 posts in 1095 days
#1 posted 05-10-2013 03:18 PM
Nice looking boxes… Thanks for sharing…
21248 posts in 2115 days
#2 posted 05-10-2013 03:56 PM
These are all very nice and well done.
helluvawreck aka Charleshttp://woodworkingexpo.wordpress.com
-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau
1554 posts in 1287 days
#3 posted 05-10-2013 04:21 PM
Nice boxes. For the first one, did you roundover the corners with a router bit? And how did you do that detail up on the top, the part that looks like it’s indented for a finger pull or …???
-- This Ad Space For Sale! Your Ad Here! Reach a targeted audience! Affordable Rates, easy financing! Contact an ad represenative today at JustJoe's Advertising Consortium.
#4 posted 05-10-2013 04:48 PM
The top and bottom (slightly oversized) were glued to the body and then sanded to final dimension on the belt sander.
For some stupid reason, when I had the 2 sides and the top & bottom together glued up, I rounded over all the edges on the router table. Needless to say, it just didn’t look right when the top and bottom were put on. Thought about adding a inlay strip of a different color wood but ended up just using a cove bit in the router table. Once getting past the original depth of the roundover radius, it cleaned up pretty well between the 2 contrasting woods. So, it’s a mistake that turned out to give me a way to open the box without adding a knob.
114724 posts in 2826 days
#5 posted 05-10-2013 05:18 PM
Cool design and super looking boxes.
-- http://artisticwoodstudio.com Custom furniture
203 posts in 1916 days
#6 posted 05-10-2013 08:17 PM
Nice boxes, nice joints, rounding the corners looks great, cove detail on the 1st box – very successful solution.Good work.
-- Terry Ferguson, Bend Oregon
6715 posts in 2049 days
#7 posted 05-10-2013 09:39 PM
Very well done!
-- Subscribe to "Stumpy Nubs Woodworking Journal"- One of the crafts' premiere online publications: http://www.stumpynubs.com/
#8 posted 05-10-2013 11:12 PM
Thanks for the explanation. I’m doing a series of boxes now and will probably steal at least part of your accidental design – I like the rounded corners.
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics