Video tutorial, turning Tulips in the lathe

  • Advertise with us
Project by harry1 posted 467 days ago 1660 views 14 times favorited 15 comments Add to Favorites Watch
Video tutorial, turning Tulips in the lathe
Video tutorial, turning Tulips in the lathe No picture No picture No picture No picture No picture
Zoom Pictures

Here is a link to the YouTube video showing my friend John teaching me to turn Tulips.

-- Harry, Western Australia

15 comments so far

View jakopo's profile


95 posts in 583 days

#1 posted 466 days ago

nice work and great tutorial

-- --Jakopo--

View Jim Jakosh's profile

Jim Jakosh

11277 posts in 1729 days

#2 posted 466 days ago

That is really neat,Harry. I learned a lot in that video. I like that sanding ball he used on the inside and that rotating sander he used on the outside. I often wondered how good they work. I must make one now!!

Also, I like that cutting wheel for the Dremel. I’ll have to get some of those too!

We had this guy named Carter shoeing how to turn very thin stemmed goblets. I wonder if he could turn the tulip and then turn that stem instead of putting in a dowel. Boy would that be a challenge!!

Thank you so much, my friend!!!!!!!!!!...................Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View a1Jim's profile


112008 posts in 2201 days

#3 posted 466 days ago

These are wonderful.

-- Custom furniture

View luv2learn's profile


1670 posts in 927 days

#4 posted 466 days ago

Thank you for sharing the video. The Tulip is beautiful.

-- Lee - Northern idaho~"If the women don't find you handsome, at least they ought to find you handy"~ Red Green

View Jamie Speirs's profile

Jamie Speirs

4109 posts in 1480 days

#5 posted 466 days ago

Great tutorial Harry a very clever tecnique


-- Who is the happiest of men? He who values the merits of others, and in their pleasure takes joy, even as though 'twere his own. --Johann Wolfgang von Goethe

View Jojy's profile


35 posts in 896 days

#6 posted 466 days ago

Beautiful work. Thanks for sharing.

-- Jojy, Dallas

View Mario's profile


101 posts in 2020 days

#7 posted 466 days ago

Thank you for sharing Harry, I had to wait all day until my workday was over to watch the video, it was worth it, think I´ll give it a shot during the weekend.

View Joe Lyddon's profile

Joe Lyddon

7674 posts in 2676 days

#8 posted 466 days ago

I find your video “UNAVAILABLE”...
... what happened?

Beautiful Tulip!

Wish I could see your video… I know it’s going to be a good one!!

Thank you.

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:"

View doubleDD's profile


2363 posts in 667 days

#9 posted 466 days ago

The tulips are beautiful and the video is great. Thanks for sharing

-- --Dave, Downers Grove, Il. When you run out of ideas, start building your dreams

View harry1's profile


512 posts in 909 days

#10 posted 466 days ago

Joe, I just got straight through to the video on YouTube using Marlene’s I pad and all the above members have viewed it so possibly try a different browser but Joe, YOU are the computer expert, what I know will fit on a large postage stamp!
I do thank you all for your kind comments. I do have another video of John showing me how HE makes pens and teaching me how to apply CA glue as a finish. I’ll pop it on YouTube in the next day or two with a link here of course.

Jim., the Dremel cutting disc cost me the best part of $20.00 as did the mandrel, quite expensive, after buying them I cam across this eBay deal

The discs are very thin and even the straight cut is a breeze, I’m impressed with them. These shots of my sander may be of help to you, the spring wire circlips prevent the disc assembly from popping out of the handle.

-- Harry, Western Australia

View Paul's profile


343 posts in 2213 days

#11 posted 465 days ago

Thank you Harry, Excellent Video!


-- If you say 'It's good enough', it probably isn't.

View Grumpy's profile


19378 posts in 2475 days

#12 posted 465 days ago

Well done Harry.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View Joe Lyddon's profile

Joe Lyddon

7674 posts in 2676 days

#13 posted 464 days ago


I found that I had another video in the middle of being Played in another window, that I had forgotten about…
I got OUT of that video, tried yours again, and it took right off!!

That was SO COOL!

That guy sure cut that out FAST!! He had that procedure down pat!!

Very nice!

OK, Harry, now that you’ve been taught, when are you going to ake a boquet of Tulips for Marlene?

Thank you… Great video!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:"

View Pimzedd's profile


442 posts in 2428 days

#14 posted 461 days ago

Thanks for posting the video Harry. It really explains how they are turned. Well done.

-- Bill - Mesquite, TX --- "Everything with a power cord eventually winds up in the trash.” John Sarge , timber framer and blacksmith instructor at Tillers International school

View Roger's profile


14311 posts in 1428 days

#15 posted 436 days ago

Very kool Harry

-- Roger from KY. Work/Play/Travel Safe.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase