|Project by AlBCuttnWud||posted 04-15-2013 04:15 PM||1126 views||0 times favorited||4 comments|
I finished up the glass and backing this weekend on this one. For those not familiar this to resemble the vertical stabilizer a.k.a. vertical stab a.k.a. F-18 tail flash…...etc etc.
It’s roughly 24 inches tall made from Sapele. I used dowels for the antennas at the top and countersunk with a cove bit. I used a simple roundover bit with a little jig to round off the ends so they would fit flush in the cove cut out. I had a small piece of bloodwood I added for the formation light
-- -Al, Patuxent River, MD