LumberJocks

Cherry Box

  • Advertise with us
Project by dlong0 posted 454 days ago 512 views 0 times favorited 1 comment Add to Favorites Watch

This is a cherry box that I turned today. Took be about 3 hours. I know… I am slow, but it turned out really well. Nothing too spectacular about it, just a box. I finished it with paste wax and then some white rouge buffing compound. I buffed it with a homemade buffing jig.

The jig consists of a buffing wheel, a piece of 3/8” all thread about 1’ long, 2 3/8” nuts to hold the buffing wheel on the all thread, 1 3/8” coupler nut epoxied to the end of the all thread(this fits over the live center). I put this on the lathe and tighten the scroll chuck all the way down to hold the all thread. This works great!!!!

-- dlong0





1 comment so far

View doubleDD's profile

doubleDD

2285 posts in 629 days


#1 posted 432 days ago

I like the job you did on the box. The lid and bottom meet up perfect. Gives me an idea for a future project. Thanks for posting.

-- --Dave, Downers Grove, Il. When you run out of ideas, start building your dreams

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase