LumberJocks

Incra Drill Press Table

  • Advertise with us
Project by wunderaa posted 04-11-2013 02:13 AM 4107 views 24 times favorited 9 comments Add to Favorites Watch

Okay, not exactly Incra but this is my take on it. This table is straight forward with 2 sheets if MDF sandwiched together and wrapped in black walnut. Incra t-track was used on the fence and the table. Table is attached to the press with 4 wing nuts. The but heads are epoxied inside of the sandwich. The sacrificial piece will be offset from center to move the wear point. Enjoy!





9 comments so far

View DIYaholic's profile

DIYaholic

18364 posts in 1834 days


#1 posted 04-11-2013 02:46 AM

Nice table.
There is a DP table build in my near future & this looks exactly like the picture in my mind. Great job!!!

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View hoss12992's profile

hoss12992

3484 posts in 1052 days


#2 posted 04-11-2013 04:40 AM

Great job.

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View Edwardnorton's profile

Edwardnorton

118 posts in 1086 days


#3 posted 04-11-2013 07:02 AM

I built a table for my Floor standing drill press about a year ago and after seeing yours I think I’ll build one like it for mine. It looks fairly thick based on the photo with the cut out under the bit, good idea. I’ll be hitting the internet for a plan something like this. Thanks for sharing!

-- EdwardNorton

View Ken90712's profile

Ken90712

16295 posts in 2348 days


#4 posted 04-11-2013 08:34 AM

Good looking table , nice work.

-- Ken, "Everyday above ground is a good day!"

View sedcokid's profile

sedcokid

2703 posts in 2758 days


#5 posted 04-11-2013 11:18 AM

Great looking table, I will have to make one!!

Thanks for sharing

-- Chuck Emery, Michigan,

View Greg D's profile

Greg D

207 posts in 1111 days


#6 posted 04-11-2013 04:51 PM

Nice job!

-- Greg D, Cen. CA, "Keep it on the Level, Do it Right the First Time!"

View TimWood's profile

TimWood

190 posts in 1401 days


#7 posted 04-13-2013 12:47 PM

Nice table! I’m a fan of Incra myself – TSLS and router table set up with the wonder fence. A DP table like this would go nicely. I’m thinking of doing something with some dust collection built in. What size is your table?

-- Tim Harrelson

View wunderaa's profile

wunderaa

235 posts in 1362 days


#8 posted 04-13-2013 05:50 PM

Thanks TimWood. The table measures about 18×25”. Look forward to your creation. I too have the TSLS system and the press table blends nicely!

View bit101's profile

bit101

106 posts in 1036 days


#9 posted 03-24-2014 02:21 AM

Puts my drill press table to shame. :)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com