LumberJocks

Router Table

  • Advertise with us
Project by Boris posted 04-08-2013 02:58 AM 3159 views 17 times favorited 21 comments Add to Favorites Watch

Hi guys

After finished my workbench, I started building my router table, it was about September last year and it took me about 10 weekends to finished it, but I could not apply the finish due to the weather been to cold. I make it after looking at some other router table posted here by others woodworkers, the wood is mostly oak, the front of the three small drawers is walnut and the sides poplar, the front of the larger one I believe is mahogany but I am not sure and the sides is poplar as well. I did not have enough wood of the same kind and I did not want to spend any more money on it, after buying the INCRA LS super system and a Jensen router lift, plus the MDF and the contact cement I run out of budget. the overall size are 28”W x 43”L x 36”H.

I appreciate your comments, Thanks for looking
(please apologize my English)
Regards





21 comments so far

View Mike's profile

Mike

139 posts in 1200 days


#1 posted 04-08-2013 03:02 AM

Now that’s one good looking router table!

-- A person of integrity never speaks of it...he walks in it...

View RogerInColorado's profile

RogerInColorado

321 posts in 1114 days


#2 posted 04-08-2013 03:07 AM

I like it. Nice arrangement and it looks like you can land an airplane on it. My kind of router table.

View Jerbone's profile

Jerbone

34 posts in 1082 days


#3 posted 04-08-2013 03:51 AM

Now that is a proper router table!

-- Joining two of my passions, beer and woodworking. www.halfyankeeworkshop.com

View hoss12992's profile

hoss12992

3484 posts in 1052 days


#4 posted 04-08-2013 05:52 AM

Great job. Love it

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View obi999's profile

obi999

195 posts in 2567 days


#5 posted 04-08-2013 05:53 AM

Looks great! Big enough, sturdy enough and a beauty for the eye.
Thank you very much for sharing.

-- *** the german lumberjock ***

View joseph000's profile

joseph000

346 posts in 1186 days


#6 posted 04-08-2013 07:39 AM

Beautiful router table.Great job.Having a router table in your woodworking shop adds a new dimension. Your skills will become noticably better if you decide to add one.Router tables are by far one of the most well used pieces of equipment in the workshop.

View doubleDD's profile

doubleDD

4235 posts in 1202 days


#7 posted 04-08-2013 12:40 PM

Great looking router table. Nice touch with the assorted lumber.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Lee A. Jesberger's profile

Lee A. Jesberger

6801 posts in 3139 days


#8 posted 04-08-2013 01:28 PM

Great looking router table.

Nice work.

Lee

-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com

View Greg D's profile

Greg D

207 posts in 1111 days


#9 posted 04-08-2013 02:52 PM

Awesome work! Going to serve youre shop well!

-- Greg D, Cen. CA, "Keep it on the Level, Do it Right the First Time!"

View CharlieM1958's profile

CharlieM1958

16162 posts in 3378 days


#10 posted 04-08-2013 03:48 PM

Very cool!

-- Charlie M. "Woodworking - patience = firewood"

View DrDirt's profile

DrDirt

3820 posts in 2901 days


#11 posted 04-08-2013 04:50 PM

That is a nice set-up.
The Incra system is neat, but I really like the drawer pulls you used.

Cheers

-- I don't trust trees. They're kinda shady

View helluvawreck's profile

helluvawreck

20272 posts in 2026 days


#12 posted 04-08-2013 05:00 PM

That is quite a nice router table and I sure would like to have one of those Incra fence systems. I bet it works good. Congratulations.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View MarkTheFiddler's profile

MarkTheFiddler

2013 posts in 1348 days


#13 posted 04-08-2013 06:18 PM

Outstanding setup. It’s a beautiful table on top of being super functional. I’m envious.

-- Thanks for all the lessons!

View quicksilver's profile

quicksilver

191 posts in 1747 days


#14 posted 04-08-2013 10:07 PM

Sweet router table
Thanks for showing

-- Quicksilver

View ksSlim's profile

ksSlim

1157 posts in 2049 days


#15 posted 04-08-2013 11:08 PM

Nice job Boris!

-- Sawdust and shavings are therapeutic

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com