|Project by TapTapTap||posted 03-29-2013 02:37 AM||1196 views||0 times favorited||5 comments|
Challenge – 15 is a requirement to convert a blank piece of wood (maximum size 12” X 12” X 1”) into something of use. The first criteria was a photo of the Project prior to commencement.
Fortunately my scrap bin had a small piece of Jetulong that was suitable. The measurements were 8.5” X 7” X 3/4”) which was within the maximum dimensions allowed. The horse head drawing was from my leatherwork library and by using carbon paper I could transfer the image to the workpiece.
I used a combination of full size chisels, Palm chisels and mechanical chisels fitted to my Dremel power tool. After the piece was sanded using 80 through to 400 grit I then used my Pyrography tools to add some colour to the finished project.