|Project by BobWemm||posted 03-28-2013 11:25 AM||768 views||0 times favorited||5 comments|
Did a little experimenting with these two wall plaques.
The first one is Native pine and quite a hard wood.
The second one is one of the many Banksia species from here.
Both plaques measure approx 12in X 5in and about 3/4in thick. I made a separate tenon and glued it onto the back to enable turning the designs, then knocked the tenon off and reset it to do the other part of the pattern.
Burnt with a butane torch.
Hope you enjoy.
-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.