Small parts Table Saw Sled

  • Advertise with us
Project by Greg D posted 03-26-2013 01:09 AM 3579 views 33 times favorited 13 comments Add to Favorites Watch

This was my take on a small parts table saw sled posted in shop notes magazine.

A combination of cherry & plywood with kregtool t track and incra hold downs. Also a sliding stop for small repetitious cuts. It works incredible, I have even been able to cut tapered pieces with the t-track parallel to the blade.

Thanks Greg

-- Greg D, Cen. CA, "Keep it on the Level, Do it Right the First Time!"

13 comments so far

View JSB's profile


731 posts in 1170 days

#1 posted 03-26-2013 02:28 AM

This is perfect. I have been wanting to make one of these for a while. Thanks for providing me with an image for my thoughts! Good job.

-- Jay -

View jeff's profile


826 posts in 2556 days

#2 posted 03-26-2013 04:02 AM

nice addition to your shop…thx for posting…

-- Jeff,Tucson,Az.

View Ken90712's profile


16042 posts in 2280 days

#3 posted 03-26-2013 08:13 AM

Nice work, these are a great asset to th shop!

-- Ken, "Everyday above ground is a good day!"

View scarpenter002's profile


575 posts in 2997 days

#4 posted 03-26-2013 12:28 PM

Very nice addition for your shop. Looks like it really provides a level of safety when dealing with small parts.
Thanks for sharing.

-- Scott in Texas

View eztrigger's profile


138 posts in 1019 days

#5 posted 03-26-2013 12:39 PM

i like the double duty as a taper jig. well done.

-- "Some get spiritual 'cause they see the light, and some 'cause they feel the heat." --Ray Wiley Hubbard

View helluvawreck's profile


19547 posts in 1958 days

#6 posted 03-26-2013 12:48 PM

That’s a nice one. It looks to be made very well and will be an asset to your shop.

helluvawreck aka Charles

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View eddie's profile


7744 posts in 1705 days

#7 posted 03-26-2013 07:58 PM

will be very handy

-- Jesus Is Alright with me

View guitarchitect's profile


33 posts in 1494 days

#8 posted 03-26-2013 11:20 PM

awesome! what issue is this in?

View Greg D's profile

Greg D

204 posts in 1043 days

#9 posted 03-27-2013 12:00 AM

Issue 127 Volume 22 page 6

Thanks for all the support LJ’s!

-- Greg D, Cen. CA, "Keep it on the Level, Do it Right the First Time!"

View gfadvm's profile


13947 posts in 1782 days

#10 posted 03-27-2013 01:45 AM

Nice job of this useful jig. Shop Notes is just full of very useful jigs. Be careful you don’t saw the end off that hold down! At least mine wasn’t an Incra! LOL

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View Chris McDowell's profile

Chris McDowell

613 posts in 1244 days

#11 posted 03-27-2013 04:34 PM

Very nice

-- Chris, , FACEBOOK: , Proverbs 16:9

View 559dustdesigns's profile


633 posts in 2259 days

#12 posted 04-08-2013 06:20 PM

This looks very useful, I might have to build one of these. Thanks 4 sharing.

-- Aaron - central California "If you haven't got the time to do it right, when will you find the time to do it over?"

View Greg D's profile

Greg D

204 posts in 1043 days

#13 posted 04-08-2013 06:28 PM

Aaron, it’s super use full! I love it. Already made more upgrades to it.


-- Greg D, Cen. CA, "Keep it on the Level, Do it Right the First Time!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics