LumberJocks

Home made Table Saw 2

  • Advertise with us
Project by Woodworker_Collins posted 03-25-2013 06:41 PM 5401 views 0 times favorited 13 comments Add to Favorites Watch
Home made Table Saw 2
Home made Table Saw 2 No picture No picture No picture No picture No picture
Zoom Pictures

This was my second run at the homemade table saw i made a lot of improvments like a t-track a self squaring fence and a rebate to hold zero clearance inserts it is also my router table now to save space, if you wish to see more of this i will be posting a short blog entry on lumberjocks and i will soon be posting a detailed blog entry with possibly a video on my website adamswoodcreation.com so keep a look out! ........finally!!!! Here’s the link!!!! It will be on my site soon but I couldn’t wait to show yas!!! http://m.youtube.com/watch?v=_xrx1n2WgPs

-- Adam, Ireland, http://www.youtube.com/user/AdamTheWoodworker





13 comments so far

View JoeinGa's profile

JoeinGa

3703 posts in 761 days


#1 posted 03-25-2013 06:46 PM

Hard to tell in that one photo, ,but is there an actual table saw under there? Or just a hand-held circular saw mounted upside down?

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View Woodworker_Collins's profile

Woodworker_Collins

188 posts in 1269 days


#2 posted 03-25-2013 07:03 PM

handheld ciricular saw :) please look at my blog entry is posted now with loads of photos

-- Adam, Ireland, http://www.youtube.com/user/AdamTheWoodworker

View JoeinGa's profile

JoeinGa

3703 posts in 761 days


#3 posted 03-25-2013 10:27 PM

Ah ha! I just saw the blog.

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View Dakkar's profile

Dakkar

297 posts in 682 days


#4 posted 03-25-2013 10:51 PM

That’s certainly showing ingenuity, Adam. I got by for a long time with a Sears Craftsman table made an inverted circular saw. It worked fairly OK as long as I spent plenty of time aligning it in the clamps underneath. The only problem was that I often needed it off the table, so I was forever installing and uninstalling the saw.

View BusterB's profile

BusterB

1505 posts in 762 days


#5 posted 03-25-2013 11:51 PM

Neat idea…. very creative problem solving.

-- Buster, Ocoee TN (Critics are men who watch a battle from a high place then come down and shoot the survivors - Hemingway)

View JSB's profile

JSB

714 posts in 832 days


#6 posted 03-26-2013 02:38 AM

Good job. I wanted to do the same not to long ago.

-- Jay - http://www.jayscustomcreations.com or http://www.woodworkingwithsketchup.com

View stefang's profile

stefang

13633 posts in 2088 days


#7 posted 03-26-2013 09:16 AM

Looks very good Adam. Do you have any bracing behind the fence?

-- Mike, an American living in Norway.

View Woodworker_Collins's profile

Woodworker_Collins

188 posts in 1269 days


#8 posted 03-26-2013 10:40 AM

@stefang what do you mean by bracing?

-- Adam, Ireland, http://www.youtube.com/user/AdamTheWoodworker

View davebulow's profile

davebulow

11 posts in 686 days


#9 posted 03-26-2013 10:58 AM

Nice work! – I’d SERIOUSLY recommend building in a riving knife! Well done though!

View Woodworker_Collins's profile

Woodworker_Collins

188 posts in 1269 days


#10 posted 03-26-2013 11:02 AM

@davebulow it had a riving knife but i removed it it wasnt even with the blade and was extremely dangerous but i will be purchasing a splitter soon (like the one the woodwhisperer did a review on)

-- Adam, Ireland, http://www.youtube.com/user/AdamTheWoodworker

View davebulow's profile

davebulow

11 posts in 686 days


#11 posted 03-26-2013 05:12 PM

Good idea! Nice work again on the saw. I think I may end up making one that’s similar!

View Philip's profile

Philip

1154 posts in 1293 days


#12 posted 04-02-2013 02:00 AM

Very nice. Saw this the other night and it gave me the nudge I needed to make mine. Gracias.

-- I never finish anyth

View woodNfish's profile

woodNfish

47 posts in 1813 days


#13 posted 04-03-2013 06:27 PM

Okay Adam, here is an example of bracing on a fence: http://lumberjocks.com/projects/73077 Scroll down to the second photo. The right triangles are bracing the back of the fence against deflection when pressure is applied to the face of the fence. Your fence doesn’t have any bracing that can be seen in your photos. Adding braces will help make certain you get straight cuts.

-- woodNfish

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase