| Project by pbtwoodworks | posted 483 days ago | 851 views | 4 times favorited | 7 comments |  |
 |
This ball is made of quarter inch thick three ply bamboo plywood. Joints are splined and glued together.initial cutting of the pentagon and hexagon shapes were done with a CNC machine for convenience while the rest such as the bevelcutcuts and spline slots were done on a table saw.
7 comments so far
Monte Pittman
home | projects | blog
13190 posts in 933 days
#1 posted 483 days ago
Very interesting. Not an easy task.
Welcome to LumberJocks
-- Mother Nature created it, I just assemble it. - It's not ability that we often lack, but the patience to use our ability
kdc68
home | projects | blog
1933 posts in 871 days
#2 posted 483 days ago
Challenging project I’m sure….well done
-- Measure "at least" twice and cut once
Robsshop
home | projects | blog
806 posts in 1570 days
#3 posted 480 days ago
Very cool build !!
-- Rob,Gaithersburg,MD,One mans trash is another mans repurposed wood shop treasure ! ;-)
waho6o9
home | projects | blog
4744 posts in 1172 days
#4 posted 480 days ago
Mighty fine work there, me likey.
a1Jim
home | projects | blog
111999 posts in 2172 days
#5 posted 480 days ago
Very cool
-- http://artisticwoodstudio.com Custom furniture
pbtwoodworks
home | projects | blog
4 posts in 484 days
#6 posted 479 days ago
Sides on the hexagons and pentagons are 50mm.the bevel on the hexagons are at 20.9 degrees. for the pentagon its 16.5 degrees
Philip
home | projects | blog
1073 posts in 1134 days
#7 posted 476 days ago
Wow, that blows my mind. Mind blown…
-- If you can dream it, I can do it!
Have your say...