|Project by Jackietreehorn||posted 03-25-2013 12:17 AM||1550 views||7 times favorited||8 comments|
Thought I’d share my outfeed extension I built. The table saw is built into the table, and the room itself is pretty small. I wanted to be able to cut a full 8ft sheet but needed something removable to get into my other work area where my router and downdraft is. Basically cut out even spaced notches on both sides of the little walkway and cut a piece of mdf to go in between. I also added some set screws to the far end to raise it up off the farthest counter a bit so I wouldn’t end up catching the edge.