|Project by brucethecontrarian||posted 03-24-2013 06:54 PM||1084 views||2 times favorited||3 comments|
I made this a while back. But Spring Cleaning is in progress and I decided to take some pictures. The carcase is made using the “Approved ‘Norm’ Method” of ply sides, internal frames, housing (dado) joints nailed through and a back glued and pinned in place. The drawers are simple trays mounted on metal slides and split into 4 compartments. The disks are held to the front of the compartment by a shoe and plate thingummybob. The drawer fronts and carcase are 19mm beech ply edged and faced with pine (from what I had available in the workshop at the time) the finish is Danish Oil. The furniture is brass.
Thanks for looking.
-- Bruce, UK