LumberJocks

90" x 90" Walnut Island Top

  • Advertise with us
Project by ARTTdylan posted 517 days ago 1732 views 4 times favorited 10 comments Add to Favorites Watch

Glue to 24”, plane, glue to 36”, sand, biscuit joint to 90”, get up on the dance floor with belt sander.

-- Dylan - www.arttwood.com -





10 comments so far

View ARTTdylan's profile

ARTTdylan

72 posts in 1686 days


#1 posted 517 days ago

Forgot to add that it is 2” thick.

-- Dylan - www.arttwood.com -

View Courtney 's profile

Courtney

49 posts in 676 days


#2 posted 517 days ago

Wow! That is beautiful. I love the way it looks with the white base. Congratulations on a great build.

-- It's very common for people to separate things they do from the things they need. - Jogge Sundqvist

View WoodGoddess's profile

WoodGoddess

100 posts in 691 days


#3 posted 517 days ago

A dream island! Beautiful addition to any kitchen!

View frankenstuff's profile

frankenstuff

26 posts in 528 days


#4 posted 517 days ago

How wide were the strips cut? Is there a standard size for the pieces to lami ate..I am just frigging drooling over that slab. What about an entire counter top out of butcher block? Thank you for the inspiration sir.

-- "the woods are lovely dark and deep"- Frost

View Dusty56's profile

Dusty56

11643 posts in 2312 days


#5 posted 517 days ago

What are you going to finish it with ?

-- I'm absolutely positive that I couldn't be more uncertain!

View Dakkar's profile

Dakkar

297 posts in 551 days


#6 posted 517 days ago

That’s an impressive job. I’ve never seen a kitchen island that deep before. I can’t imagine what they’re going do use the center for.

View eztrigger's profile

eztrigger

95 posts in 551 days


#7 posted 517 days ago

That thing is a monster. good work on the dance floor

-- "Some get spiritual 'cause they see the light, and some 'cause they feel the heat." --Ray Wiley Hubbard

View ARTTdylan's profile

ARTTdylan

72 posts in 1686 days


#8 posted 517 days ago

frankenstuff: strips were cut to 2-1/2” before planing and sanding. We have done entire countertops out of butcher block.

Dusty56: Customer is going to use a mineral oil and beezwax mixture.

It took 8 people to get it inside. We made a dolly for it to roll into the house. We don’t warranty such a large butcher block.

Thanks everyone!

-- Dylan - www.arttwood.com -

View DGar's profile

DGar

35 posts in 478 days


#9 posted 393 days ago

I love the look of the unfinished walnut on the white base. I’m thinking about building a kitchen table and matching bench with that combination. Anyone know of a protective finish that would leave the walnut looking unfinished?

-- "Those who are not dissatisfied will never make any progress" - Dr. Shigeo Shingo

View firefighterontheside's profile

firefighterontheside

3744 posts in 480 days


#10 posted 393 days ago

I would think water based poly and no stain would be the best bet to make something look unfinished and in a satin finish.

-- Bill M. I love my job as a firefighter, but nothing gives me the satisfaction of running my hand over a project that I have built and just finished sanding.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase