LumberJocks

Another K-Cup drawer

  • Advertise with us
Project by duckmanwv posted 03-17-2013 08:47 PM 2329 views 5 times favorited 6 comments Add to Favorites Watch

I posted one of these I made for my office and got a request to make another. It is made from oak and has 3 coats of polyshades on it. The tray is plywood. Used a forstner bit for the holes. It took me longer than expected because I got my finger a too close to the bandsaw blade, which resulted in 6 stitches. Oh well, there will alway be part of me in this project.





6 comments so far

View grizzman's profile

grizzman

7042 posts in 1970 days


#1 posted 03-17-2013 08:55 PM

ouch…i guess you can have a brew and think this one over…be careful next time, cool idea you have there..who knows, you might get more orders …

-- GRIZZMAN ...[''''']

View Deycart's profile

Deycart

384 posts in 924 days


#2 posted 03-17-2013 09:33 PM

I think drinking may have been what caused the damage… oh you mean coffee. That’s one of the few projects I have seen made with polyshades that actually looks good!

View cajunpen's profile

cajunpen

14395 posts in 2732 days


#3 posted 03-18-2013 01:30 AM

Well done – except for the part where your finger went into the bandsaw blade. Thankfully it wasn’t worse

-- Bill - "Suit yourself and let the rest be pleased." http://www.cajunpen.com/

View Chris Speights's profile

Chris Speights

120 posts in 1024 days


#4 posted 03-18-2013 11:48 AM

Great project, Duckman. Sorry about your finger.

Can you tell me the size of the hole for the KCups? The dimensions?

Thanks!

View MrBagel's profile

MrBagel

56 posts in 657 days


#5 posted 03-18-2013 06:20 PM

K-Cup dimensions are 2” tall with a 2” diameter top.. So 1 3/4” diameter forstner bit should work so long as you have a little clearance with the drawer.

This is an excellent project. I’m going to build one next week now. Great work!

-- Just remember... Keep your stick on the ice! - Red Green

View duckmanwv's profile

duckmanwv

51 posts in 648 days


#6 posted 03-18-2013 09:50 PM

Like MrBagel said the holes are 1 3/4. On this one I wasn’t thinking about the top so had to glue up some oak to make it fit. The next one will be 4 holes wide and 5 deep. I will also but the holes about 3/4 apart.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase