|Project by BoiseMy3SONS||posted 02-26-2013 08:57 AM||1616 views||6 times favorited||9 comments|
We built this sliding sofa table from a huge live-edge Eucalyptus board. We used walnut for the base, which was joined with mortise and tenons, then secured with two 3/8 inch dowels through each joint. It came out beauiful as we finished it with no pigment, just seal coat(non-waxed shellac) and top coat(water based polyurethane) then a nice buffing with emulsified beesewax.
-- Paul A. Pomeroy