or Join Now!
This is the router cabinet that I just finished. I used a Rockler lift and top. The design came from the internet but was modified to remove the flush mount drawers to make it easier. I used Cabinet plywood and red Oak for the face.
Feb 25, 2013
home | projects | blog
15 posts in 1279 days
Preview this project card
201 posts in 2769 days
#1 posted 02-25-2013 01:11 PM
Welcome to Lumberjocks!this cabinet looks really fine and sturdy, well done. Must be a pleasure to use it.I nearly finished my router cabinet i am working on, just a few things to do from now. Hope i could post it soon. Thank you for sharing
-- *** the german lumberjock ***
16807 posts in 2550 days
#2 posted 02-25-2013 01:17 PM
Nice set up , enjoy this will serve you well.
-- Ken, "Everyday above ground is a good day!"
22269 posts in 2228 days
#3 posted 02-25-2013 02:24 PM
That’s a very nice job on that router cabinet. It will pay off in dividends. Congratulations.
helluvawreck aka Charleshttp://woodworkingexpo.wordpress.com
-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau
1135 posts in 1727 days
#4 posted 02-25-2013 02:57 PM
Nice job. It looks tons better than the bought jobs and you can say I built it.
-- Dewayne in Bainbridge, Ga. - - No one can make you mad. Only you decide when you get mad - -
16295 posts in 2467 days
#5 posted 02-25-2013 03:11 PM
I love it…........... a man after my own heart!!!!!!!!I would call it a router performance station!!!!!!!!!!!!.................Jim
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!
5 posts in 1279 days
#6 posted 02-25-2013 05:09 PM
Looks great – a LOT better than mine! This was my first project. Didn’t realize that 3/4” plywood was less than 3/4” until after I completed the Dados and rabbets. Totally out of square. Drawers and door don’t work, etc. Top is flat and works well – enjoy yours!!!
-- "It'll feel a lot better when it stops hurting."
1057 posts in 1638 days
#7 posted 02-26-2013 12:02 AM
Very nice. I’m planning on building a new router table too, yours looks very nice.
192 posts in 2728 days
#8 posted 02-26-2013 12:07 AM
super nice. Question: is it possible that the router will overheat it is in a closed box?
-- Gerry (the beginner), Gatineau, QC, Canada
#9 posted 02-26-2013 12:48 AM
I haven’t had a problem with it overheating. The front of the door is 1/8 Lexan with 4 1.5” holes. I hook my shop to the back and all the dust goes out without any problem. Thanks for all the comments.
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics