LumberJocks

Wine glass holders

  • Advertise with us
Project by lumberjoe posted 02-22-2013 01:33 PM 1813 views 10 times favorited 12 comments Add to Favorites Watch

I see a lot of these around lately and I had some scraps laying around the shop so I figured I would give it a shot

Maple and walnut, and walnut and maple. I used HHG when laminating. Finish is Arn-R-Seal and wax

-- Unplugged Woodworkers - https://www.facebook.com/groups/213418935481974/





12 comments so far

View chrisstef's profile

chrisstef

13012 posts in 2008 days


#1 posted 02-22-2013 01:39 PM

Another nice project Joe. You’re gonna have to rezone your house soon to commercial. You pump em out man.

-- "there aren’t many hand tools as awe-inspiring as the #8 jointer. I mean, it just reeks of cast iron heft and hubris" - Smitty

View lumberjoe's profile

lumberjoe

2883 posts in 1250 days


#2 posted 02-22-2013 01:47 PM

Thanks! I’ve also made about 25 pens and a good 16 to 18 cutting boards in the last 6 weeks. Once the weather gets warm I’ll really be able to start cranking stuff out.

-- Unplugged Woodworkers - https://www.facebook.com/groups/213418935481974/

View Dchip's profile

Dchip

268 posts in 2254 days


#3 posted 02-22-2013 02:46 PM

I like the concept. Do you have to be careful to remove both glasses at the same time to keep it balanced?

-- Dan Chiappetta, NYC, http://www.9x7woodworks.com

View lumberjoe's profile

lumberjoe

2883 posts in 1250 days


#4 posted 02-22-2013 02:51 PM

It will go out of balance, but the holes for the glasses are larger than the slots cut, so the glasses kind of bottom out in the holes. You need to lift them up a bit to slide them out. In the next one I may do a slightly larger hole and a slightly smaller slot.

-- Unplugged Woodworkers - https://www.facebook.com/groups/213418935481974/

View KnotCurser's profile

KnotCurser

1917 posts in 2070 days


#5 posted 02-22-2013 05:10 PM

This looks great!

One suggestion I might lend is to wait until the slots are cut for the glasses before you route your edges – that way you can also route the slot and make it look really nice!

Great build

-bob

-- Robert Rhoades WoodWorks / Email: rrww@rhoadesclan.com / www.rhoadesclan.com

View lumberjoe's profile

lumberjoe

2883 posts in 1250 days


#6 posted 02-22-2013 05:17 PM

Router bit wouldn’t fit :). I need a smaller one

-- Unplugged Woodworkers - https://www.facebook.com/groups/213418935481974/

View WoodenFrog's profile

WoodenFrog

2737 posts in 1915 days


#7 posted 02-22-2013 08:05 PM

Very cool!! Nice work!!

-- Robert B. Sabina, Ohio..... http://www.etsy.com/shop/WoodenfrogWoodenProd

View GlennsGrandson's profile

GlennsGrandson

434 posts in 1311 days


#8 posted 02-22-2013 11:45 PM

Cool idea and Ménage à Trois is also a good wine!

-- Grant - S/N Dakota

View lumberjoe's profile

lumberjoe

2883 posts in 1250 days


#9 posted 02-22-2013 11:50 PM

Thanks! Having a bandsaw has opened a whole world of new project possibilities for me

-- Unplugged Woodworkers - https://www.facebook.com/groups/213418935481974/

View Bill_N's profile

Bill_N

235 posts in 1280 days


#10 posted 02-23-2013 01:18 AM

Thanks I waited to make one now I have an even better idea what to do
work work work don’t you just love it

-- I have the Saw Dust Fever

View Fishinbo's profile

Fishinbo

11362 posts in 1177 days


#11 posted 02-25-2013 03:12 PM

Looks great and like the wood combo. Very useful, great way to serve wine.

View JimmyDeez's profile

JimmyDeez

7 posts in 919 days


#12 posted 02-26-2013 01:31 AM

Cool!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com