LumberJocks Woodworking Forum banner

Project Information

This is the first of four pieces I made for my master bath. Only the exposed wood or face is mahogany, any face that is buried next to the wall, is ply or poplar. Believe it or not the maple is from a big box store. All the hinges and glides are Blum soft close. I hope to post in a blog all four pieces because they are picture heavy. I have posted them on my Facebook page ( dragonfly woodworking)

patrick

Gallery

Comments

· Registered
Joined
·
20,030 Posts
Nice job. It would be very handy to have.
 

· Registered
Joined
·
1 Posts
That looks very nice. What kind of finish did you use?
Thanks heaps.
 

· Registered
Joined
·
0 Posts
nice cabinet, great idea for the pull out drawers. On a different note, how wide is that shower? That looks exactly like what we are thinking of. thanks
 

· Registered
Joined
·
6 Posts
@ Buche my secret finish is General finishes ARM-R-SEAL oil & urethane semi gloss (green can).... wipe on ….wipe off, sand between coats (high grit 400 or higher) wipe on ….wipe off. DONE!

@ Lanaug the shower is 7' long by 3' wide. I have a huge huge huge documentation ( I bet 1000 plus pics) of the transformation of the master bath. Every product and aspect of this project had a ton of research. The only portion I did not do was the glass block window and the ceiling skim coat.
 

· Registered
Joined
·
259 Posts
A very fine looking cabinet. Like the design, joinery and the finish. Very practical project and a lot of storage to boot.
 
Top