or Join Now!
I built this cart to consolidate the table saw and router on one unit that I could easily move around the shop.
Feb 19, 2013
home | projects | blog
38 posts in 1255 days
Preview this project card
1732 posts in 2411 days
#1 posted 02-19-2013 07:06 PM
Slick looking rig.
-- Chris K
1817 posts in 1498 days
#2 posted 02-19-2013 07:15 PM
Looks great! Nice work
-- My englisch is bad but how is your dutch?
632 posts in 1333 days
#3 posted 02-19-2013 08:08 PM
-- The common man thinks. The wise man is silent. The stupid man discusses.
330 posts in 1999 days
#4 posted 02-19-2013 08:12 PM
Great looking cart. Is you shop and tools always that orginized? Way to go!
#5 posted 02-19-2013 11:29 PM
Thanks for the positive feedback. Things are only organized when I am not doing a project
13347 posts in 3002 days
#6 posted 02-19-2013 11:47 PM
Nice set up.
1251 posts in 1383 days
#7 posted 02-20-2013 12:19 AM
2094 posts in 1738 days
#8 posted 02-20-2013 12:35 AM
Nice work, now throw some sawdust around and stop being so tidy….. (laughing) Occassionally WIVES look at such pictures and then demand to know why OUR shop looks like a sawdust convention took place! (Laughing)
-- Live to tell the stories, they sound better that way.
16711 posts in 2518 days
#9 posted 02-20-2013 01:29 AM
Man this is sweet. That Incra set up is amazing. That table saw works well enough for you? Just curious with the tools I can see and Snap-on tool box it’s pretty obvious you like great tools. I’m on my 3rd table saw and getting ready to upgrade to a 5 Hp one as my 1 3/4 sometimes struggle cutting 8/4 and 10/4 even with a clean fresh Forrest blade. Great work…..
-- Ken, "Everyday above ground is a good day!"
#10 posted 02-20-2013 03:43 AM
My wife follows me around with a dust pan and a broom. If I set a tool down she puts it away. It drives me crazy but the shop stays fairly clean and organized. I have a lot of metal working equipment in the shop including welding equipment so that drives me to keep the wood scraps and dust cleaned up.
The table saw is an old Craftsman that belonged to my Dad. With a thin kerf blade I have had fairly good luck processing 8/4 material.
I am really happy with the Incra fence. It is so precise and repeatable. I also have the super fence for the router and it works great as well.
#11 posted 02-20-2013 05:05 AM
LOL, my wife is from Ukraine. None of her family had anything like a woodshop so everything in the shop is new and in her mind untouchable. When we first came home she asked where the broom was so she could clean up. I lit my cigar and answered “When I am dead!”
78 posts in 2539 days
#12 posted 02-20-2013 05:05 AM
nice- i hope to have one that nice when i move. if things go like i planned i will have 2 table saws side by side one on the left with a dado-blade setup . ideal would be 3 – one with a 45 —- i have a router table with 3 routers in it now and love it.
-- rf58, Illinois
462 posts in 1282 days
#13 posted 02-20-2013 10:40 AM
@mwill – Can I borrow your wife?
-- "Nothing happens until you build it"
34 posts in 1561 days
#14 posted 02-20-2013 11:38 AM
I notice a glass with Scotch in it sitting on the saw. I presume you use that after all cutting has been done. Neat looking shop.
#15 posted 02-20-2013 03:18 PM
Blondie has a habit of cleaning my shop as well. She has slowed down a bit on that, but it drove me crazing in the beginning. But if you saw the inside of her house it would be obvious. Its only messy when I am home alone LOL Nice set up…..
View all comments »
showing 1 through 15 of 24 comments
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics