| Project by randyb | posted 95 days ago | 2121 views | 20 times favorited | 20 comments | ![]() |
![]() |

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
|
Latest Projects | Latest Blog Entries | Latest Forum Topics
|
Latest Projects | Latest Blog Entries | Latest Forum Topics
|
20 comments so far
Chris Mobley
home | projects | blog
121 posts in 96 days
#1 posted 95 days ago
Great Job!
-- Chris Mobley - http://www.cmobleydesigns.com
Ken90712
home | projects | blog
12660 posts in 1357 days
#2 posted 95 days ago
Great job, never enough table space when working. Should serve you well.. Good luck keeping it clean if your like me. Mine looks like I have been doing woodowrking for over 100 yrs LOL.
-- Ken, "Everyday above ground is a good day!"
Bill Szydlo
home | projects | blog
43 posts in 856 days
#3 posted 95 days ago
Nice job. I am in the process of planning an assembly table and am wondering if you could share where you got the plan from?
Thanks.
Bsmith
home | projects | blog
257 posts in 838 days
#4 posted 95 days ago
Awesome table. Wish I had room for something like that in my shop.
-- Bryan
Diggerjacks
home | projects | blog
1311 posts in 1307 days
#5 posted 95 days ago
Hello Randyb
Great work
I look forward your future project made with it
Thanks for sharing
-- Diggerjack-France ---The only limit is the limit of the mind and the mind have no limit
helluvawreck
home | projects | blog
10413 posts in 1035 days
#6 posted 95 days ago
That looks great and it also looks good and sturdy. Nice work.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau
SeaFarin
home | projects | blog
34 posts in 480 days
#7 posted 95 days ago
Very nice! Looks like a good working height as well. I want one.
-- I'm Chuck and I wood not chuck wood cause I keep finding uses for it!
Béla
home | projects | blog
24 posts in 98 days
#8 posted 94 days ago
Very nice indeed! I’m not familiar with the Wood mag plans, is the top a torsion box?
-- Béla, Memphis TN
jeff
home | projects | blog
421 posts in 1633 days
#9 posted 94 days ago
nice build and i like the drawers for storage…
-- Jeff,Tucson,Az.
whitebeast88
home | projects | blog
1864 posts in 358 days
#10 posted 94 days ago
very nice assembly table!!!
-- It don't have to be straight,it's just a suggestion!!!
getlostinwood
home | projects | blog
210 posts in 770 days
#11 posted 94 days ago
Second the plans/issue request.
Great looking table
-- The basis for optimism is shear terror
randyb
home | projects | blog
117 posts in 1496 days
#12 posted 94 days ago
Thanks for all of your nice comments, it is a torsion box top, very easy to build, here is a link to the plans http://woodcraftplans.com/osc/reliably-rugged-assembly-table-paper-plan-p-2058.html they can be found in a back issue of wood mag. i’m not sure what issue it was. It is roughly 4’ by 4’ and 30” tall. I didn’t care for the plans, I ended up making corrections for every part, I then just started building on my own. maybe it was my fault, who knows. I am use to building from shop notes plans and they are very well written. I like the fact that is mobil and rock solid sturdy. and kind cool, takes a lot less room than I thought it would.
-- I was going for that distressed look
mbs
home | projects | blog
969 posts in 1108 days
#13 posted 94 days ago
Well thought out and executed.
-- Sorry the reply is so long. I didn't have time to write a short reply.
Tom Pritchard
home | projects | blog
60 posts in 860 days
#14 posted 94 days ago
I wish I had room for something like that. That’s nice…
-- Tom in Madison, Indiana
dnick
home | projects | blog
582 posts in 550 days
#15 posted 94 days ago
I too, wish I had room for a table like that. Very well done.
-- dnick, North Hollywood, Ca.
View all comments »
showing 1 through 15 of 20 comments
Have your say...