| Project by Bill_N | posted 101 days ago | 855 views | 3 times favorited | 3 comments |  |
 |
Thought this was a great idea when I saw it posted earlier.
Was easy to make but my first couple of test cuts were less than impressive.
after more fiddling I determined that I needed better clamping.
Now I am getting decent cuts but have noticed the saw might be out of alignment just a short hair tad.
of coarse in wood working there is always room for improvement
-- I have the Saw Dust Fever
| Pin It |
3 comments so far
FreddyS
home | projects | blog
171 posts in 944 days
#1 posted 101 days ago
Nicely done Bill!
-- Learning one thing at a time
mds2
home | projects | blog
68 posts in 115 days
#2 posted 100 days ago
I built a very similar sled about a year ago. I put a track and a hold down on it the hold the work piece in place. After using it for a while I really dislike this jig. It is very dangerous. The cut off piece of the end sits right on top of the blade and has a tendency to fly out. The second time I used it the cutoff hit right me in my safety glasses. Good luck.
Bill_N
home | projects | blog
189 posts in 449 days
#3 posted 99 days ago
Thanks for the warning
I may have to make some changes
-- I have the Saw Dust Fever
Have your say...