|Project by bamaboy||posted 02-08-2013 12:26 AM||2381 views||13 times favorited||4 comments|
This table saw runout table is a two-part table. Everything is constructed withYP 1×4 framework, 3/4 plywood
runners for the melamine tops. All frames and runners are gluded, screwed or nailed to maintain ridgid top. The first FIXED table is attached to the back rail of the tablesaw fence slide, and is 12 inches wide x 48” including the framework. The three tops can be popped out for replacement or cleaning. The second table is a fold-down table with the tops screwed to the framework runners. The size of each section is 15.7×30 inches including frames totaling 48 ” wide. The top is hinged on a 48” piano hinge with the legs moving on a 3/8” carriage bolt. Fixed table has miter gauge slots cut into the fixed top, the folddown table has no slots as the miter gauge would be past blade at this point.