|Project by Greg Wurst||posted 06-01-2008 04:03 AM||7002 views||30 times favorited||3 comments|
Imitation is the sincerest form of flattery….
I put this together in about 3 hours this afternoon. Nothing exceptional here just changed some spacing and added some 3/8” dowels glued into slight holes drilled with a 3/8” Forstner bit for the sanding discs. If you’re interested you can get my Sketchup files and material list here:
The cutting diagram was based on some scrap I had lying-around, so if you want to use it move the pieces around to fit your leftovers or new sheet goods. The carcass is 1/2” ply with a 3/4” piece of ply between the sides and 3/16” ply platforms.
-- You're a unique and special person, just like everyone else.