| Project by JSB | posted 111 days ago | 827 views | 4 times favorited | 6 comments |  |
 |
Just trying to use up some scraps. I ended up making 9 trivets. I had 2 casualties…oh well, just scrap. 7 survived. 6” trivets with a 30 degree chamfer on bottom. They turned out better than I had expected. 56 pieces, 168 dados, and 336 movements across the blade. I used my scrap kerfmaker, recut to a 1/2” dado set, to cut the outside dados. Here are 2 videos covering the build. Thanks for watching.
-- Jay - http://www.jayscustomcreations.com or YouTube.com/jayscustomcreations
| Pin It |
6 comments so far
Monte Pittman
home | projects | blog
7080 posts in 511 days
#1 posted 111 days ago
Excellent job as always
-- Mother Nature created it, I just assemble it. - It's not ability that we often lack, but the patience to use our ability
jaykaypur
home | projects | blog
2501 posts in 581 days
#2 posted 111 days ago
Nice work. These turned out looking real good. Ain’t scrap amazing!
-- Use it up, Wear it out --------------- Make it do, Or do without!
Roger
home | projects | blog
9219 posts in 977 days
#3 posted 111 days ago
recycle, recycle, recycle, that’s what I always say. Very good
-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net
bobkberg
home | projects | blog
328 posts in 1246 days
#4 posted 111 days ago
Nicely Done! Good job on the video too!
-- Bob www.singularengineering.com - A sideline, not how I earn a living
JSB
home | projects | blog
521 posts in 251 days
#5 posted 111 days ago
Thanks for all the kind words folks!
-- Jay - http://www.jayscustomcreations.com or YouTube.com/jayscustomcreations
Fishinbo
home | projects | blog
4345 posts in 348 days
#6 posted 109 days ago
Well done and nice looking projects. Great salvage of the wood scraps and great video!
—www.sawblade.com
Have your say...