VECTER coffee table

  • Advertise with us
Project by Geoffrey Young posted 01-31-2013 10:28 PM 9983 views 26 times favorited 17 comments Add to Favorites Watch

Following on from the CNX side table and using 40mm square is a tad simpler to workout angles then on round stock and the way the flat surfaces refract light really highlight the angles.
This was going to be just a concept piece making it smaller. IT turned out better than i exspected, it is 460mm tall.
It had to have a glass top, not going to hide all that awsome construction, this was my first use of glass on my furniture, it’s 10mm safety glass. I cut a template out of 4mm MDF and gave that to the glazer.
I did not know how secure it would be on rubber buttons but you pretty much have to puch the table over before the glass will come off but you can lift it straght off impresive.
I had to wait five weeks for the glass to turn up because i didnt order it till just before chistmas so it didnt make it into my exhibition.
It also looks awsome hanging on the wall too.


17 comments so far

View BTimmons's profile


2303 posts in 2683 days

#1 posted 01-31-2013 10:41 PM

Very impressive geometry! How many hours do you have in it?

-- Brian Timmons -

View Geoffrey Young's profile

Geoffrey Young

54 posts in 3040 days

#2 posted 01-31-2013 10:52 PM

about 6 hours. cutting the wood and the angles was straght forward just getting the joins to match up perfect took time


View Boatman53's profile


1059 posts in 2394 days

#3 posted 01-31-2013 11:04 PM

I like that design Geoff, and I think you are right about the square sections and light reflection. Well done.

-- Jim, Long Island, NY home of the chain leg vise

View Chris Moellering's profile

Chris Moellering

227 posts in 2846 days

#4 posted 01-31-2013 11:13 PM

Very striking piece. Nicely done.

-- Grace & peace, Chris+

View Ken90712's profile


17594 posts in 3386 days

#5 posted 02-01-2013 12:24 AM

Great job and cool design..very funky which is good!

-- Ken, "Everyday above ground is a good day!"

View Oldtool's profile


2736 posts in 2388 days

#6 posted 02-01-2013 01:36 AM

Very nice, very nice indeed. Quite unusual, and very interesting.

-- "I am a firm believer in the people. If given the truth, they can be depended upon to meet any national crisis. The point is to bring them the real facts." - Abraham Lincoln

View nonickswood's profile


554 posts in 2585 days

#7 posted 02-01-2013 01:57 AM

Neat Design! Lots of angles there, nice work!

-- Nick, Virginia,

View MarkTheFiddler's profile


2068 posts in 2386 days

#8 posted 02-01-2013 03:03 AM

Wow – that’s incredible. Nice job figuring out those angles. Especially the intersecting pieces!

-- Thanks for all the lessons!

View deon's profile


2522 posts in 3223 days

#9 posted 02-01-2013 07:07 AM

Very cool!

-- Dreaming patterns



197 posts in 2532 days

#10 posted 02-01-2013 08:22 AM

GREAT artistic craftsmanship. thanks for sharing the project.


View Monte Pittman's profile

Monte Pittman

30050 posts in 2536 days

#11 posted 02-01-2013 01:02 PM

Very cool looking design.

-- Nature created it, I just assemble it.

View Lars Öhlin's profile

Lars Öhlin

83 posts in 3555 days

#12 posted 02-01-2013 05:07 PM

impressive design and craftsmanship!

-- Lars Öhlin [Sweden - Helsingborg - Domsten]

View Natalie 's profile


367 posts in 2164 days

#13 posted 02-01-2013 05:43 PM

Okay Geoffrey, I so envy people who can say “cutting the wood and the angles was straght forward”. That makes my eyes cross. It’s just not my gift. I;ll be talking about that more when I get around to posting pics of the Rogowski Stool I made…..

-- Natalie - My mind is like a bad neighborhood, I don't like to go there alone.

View Fishinbo's profile


11362 posts in 2373 days

#14 posted 02-01-2013 07:20 PM

Stunning table! Always like combination of wood and glass. This one is art itself.


View oldnovice's profile


7321 posts in 3565 days

#15 posted 02-01-2013 07:23 PM

That is an impressive clean design, good job!

-- "I never met a board I didn't like!"

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics