| Project by dhart1969 | posted 119 days ago | 520 views | 1 time favorited | 3 comments |  |
 |
I saw so many of these on here after joining LJs i could not resist trying a few. The first one is cherry, walnut, soft maple, jatoba and hard maple and was my own design. It was finished with mineral oil. The other two are hard maple and purple heart and were finished with watco butcher block. I got that idea from so many seen here (originally from the wood whisperer I guess). If I make more cutting boards I think I’ll go with the butcher block finish.
-- Dave in NH
| Pin It |
3 comments so far
RobertT
home | projects | blog
42 posts in 953 days
#1 posted 119 days ago
Nice boards! Do you mind describing how you routed the finger grips in the ends?
Tyler
home | projects | blog
52 posts in 184 days
#2 posted 119 days ago
id like to know as well, great boards
-- You can get alot further with a kind word and a hand gun, than just a kind word alone
dhart1969
home | projects | blog
13 posts in 177 days
#3 posted 119 days ago
Thanks for the comments Robert and Tyler. I had the board vertically in my vise and I used my router with a round nose bit and the routers fence. It definitely takes a steady hand but wasn’t too difficult.
-- Dave in NH
Have your say...