|Project by Ken90712||posted 01-22-2013 05:09 AM||1788 views||0 times favorited||10 comments|
While working in my buddy’s machine shop I noticed this interesting piece in his shop. When I questioned him on this, he explained what it was. Then he asked, if you could make a base for it that would be great. So off to my shop and I started thinking how could I make this look really nice for Paul. He has helped in so many ways. He taught me how to weld and helped me build an 8 inch inflatable sander or anything else I need help with.
I used some Blue Oak that I purchased from Tule Peak Timber (ex-Lumberjock Rob). I drilled the hole at 35 degrees on my drill press. Used 5 min epoxy to hold this beast in so it didn’t fall out. Cpl coats of Deft. I had the plate done at the local trophy shop.
Figured all you Harley Davidson guys would like this!
All comments welcome as always. Thx for looking.
-- Ken, "Everyday above ground is a good day!"