|Project by Airframer||posted 01-21-2013 07:22 PM||4033 views||12 times favorited||12 comments|
Wood project number 3. I keep learning juust a bit more with each and every project and each one goes a bit smoother than the last.
I needed a way to keep all my drilling and aluminum finishing supplies right at hand so I built this simple wall cabinet/shelf/pegboard thing to sit behind my drill press.
It is made from some very cheap .99 scrap wood from HD and a piece of pegboard for the backing. I used 1/4 dowels to hold the shelves.
Thanks for looking. I am still learning so any comments/suggestions are always welcome.
-- Eric - "I'm getting proficient with these hand jobbers. - BigRedKnothead"