| Project by TurningHeads | posted 121 days ago | 339 views | 0 times favorited | 4 comments |  |
 |
Good morning fellow dust makers! I haven’t posted pics of my pens before, but I had to try to get a good picture of my latest one. Figured Maple is so gorgeous with its iridescence it gives off, but unfortunately the camera fails to capture it. I hope each and every one of you have a great, and safe, day!
-- "There's plenty of time to read the instruction manual when you're laying in the hospital bed". - Dad
| Pin It |
4 comments so far
Vince
home | projects | blog
668 posts in 1596 days
#1 posted 121 days ago
Nice looking pen, what type of pen/kit is that? Also what finish did you use?
Thanks for posting this pen.
-- Vince
TurningHeads
home | projects | blog
254 posts in 778 days
#2 posted 121 days ago
Thanks, Vince. This is a Jr. Majestic sold by Penn State Industies. I use a couple coats of thin CA glue, sand with 600 grit, another coat of CA, sand again, and then a couple coats of One Step plastic polish.
-- "There's plenty of time to read the instruction manual when you're laying in the hospital bed". - Dad
jeff
home | projects | blog
416 posts in 1631 days
#3 posted 121 days ago
good looking pen…
-- Jeff,Tucson,Az.
Ozfiddler
home | projects | blog
40 posts in 1590 days
#4 posted 120 days ago
Beautiful pen – well done :-)
Cheers
Jerry
-- Jerry, Australia
Have your say...