| Project by PCTNWV | posted 127 days ago | 601 views | 6 times favorited | 7 comments | ![]() |
![]() |
Having seen a few of these made I decided it would be a fun project just to get back in the shop for the weekend. All I needed was 3 cheap hammers (Harbor Freight – $2.99 each) and a piece of Oak I had laying around plus a bit of lacquer to finish it… Great project for a weekend and a great place to hang up aprons and coats.
-- Troy, Virginia
| Pin It |

























7 comments so far
rockrunner
home | projects | blog
28 posts in 375 days
#1 posted 127 days ago
Good use for h-f tools
a1Jim
home | projects | blog
87068 posts in 1745 days
#2 posted 127 days ago
Fun coat rack.
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
PCTNWV
home | projects | blog
97 posts in 972 days
#3 posted 127 days ago
Jim, Thanks it was a lot of fun. Sometimes the simple project are the best.
-- Troy, Virginia
PCTNWV
home | projects | blog
97 posts in 972 days
#4 posted 127 days ago
rockrunner, did not want to spend a fortune on the project.
-- Troy, Virginia
Timthemailman
home | projects | blog
256 posts in 944 days
#5 posted 126 days ago
That’s a really idea. Thanks for the post
oldschooltools
home | projects | blog
8 posts in 129 days
#6 posted 126 days ago
great idea, I have a lot of old hammers all different types think I will make one for the workshop, how have you fixed them? I;m pesuming a couple of screws through the rear?
thanks for sharing
-- gary www.oldschooltools.co.uk
PCTNWV
home | projects | blog
97 posts in 972 days
#7 posted 126 days ago
Gary, you are correct just a couple of screw 2 1/2 inches long.
-- Troy, Virginia
Have your say...