| Project by bscheef | posted 132 days ago | 324 views | 0 times favorited | 2 comments |  |
 |
used CB designer to make it. The types of wood that i used were mahogany, cherry, maple, and oak. First i cut strips of the wood i needed out and then glued them together. I then cut out the strips and flipped every other one. then i glued them together and sanded. I put many coats of mineral oil on it.
| Pin It |
2 comments so far
Dusty56
home | projects | blog
10505 posts in 1855 days
#1 posted 132 days ago
Very nice looking board.
It appears that you must be part of a class doing the same project.
Just for future reference , Oak , especially Red Oak , isn’t recommended for cutting boards due to its porosity. Bacteria gathers in the pores and can contaminate your food.
Best wishes on all of your projects !
-- When did quiet and quite become the same word ? I'm guessing about the same time as your and you're did.
Surfside
home | projects | blog
2277 posts in 340 days
#2 posted 132 days ago
Sweet! Keep it up!
www.bandsawparts.com
-- "someone has to be wounded for others to be saved, someone has to sacrifice for others to feel happiness, someone has to die so others could live"
Have your say...