LumberJocks

Round Cutting Board

  • Advertise with us
Project by TimStoltzfus posted 01-03-2013 11:53 PM 1000 views 2 times favorited 10 comments Add to Favorites Watch

Walnut end grain cutting board, with wedge shaped pieces. Each wedge is 9 degrees, consisting of nine pieces each. Overall size is 29 inches, one and a half inches thick. I was able to rout a fancy design in the center, featuring a ‘B’, for the customers last name. This design is taken from a similar project by ‘Childress’. I actually used the same process.





10 comments so far

View Schwieb's profile

Schwieb

1617 posts in 2279 days


#1 posted 01-03-2013 11:58 PM

Gorgeous! I sure would like to have that CNC carver or have you closer so I could use your services.

-- Dr. Ken, Florida - Durch harte arbeit werden Träume wahr.

View RussellAP's profile

RussellAP

3029 posts in 1104 days


#2 posted 01-04-2013 12:04 AM

Really nice. Why don’t you describe the process and the finish you used.

-- A positive attitude will take you much further than positive thinking ever will.

View AandCstyle's profile

AandCstyle

1613 posts in 1075 days


#3 posted 01-04-2013 12:11 AM

That is one humongous CB. It must weigh a ton. Great execution! I agree with Russell, can you point us to the process?

-- Art

View a1Jim's profile

a1Jim

113061 posts in 2395 days


#4 posted 01-04-2013 12:24 AM

Unique cutting board ,cool design.

-- http://artisticwoodstudio.com Custom furniture

View childress's profile

childress

841 posts in 2359 days


#5 posted 01-04-2013 12:25 AM

Awesome work Tim! Love the center

-- Childress Woodworks

View Monte Pittman's profile

Monte Pittman

16137 posts in 1156 days


#6 posted 01-04-2013 12:57 AM

Really incredible work

-- Mother Nature created it, I just assemble it.

View Ampeater's profile

Ampeater

403 posts in 2565 days


#7 posted 01-04-2013 02:57 PM

Here is the original post.

http://lumberjocks.com/projects/46030

-- "A goal without a plan is a wish."

View AandCstyle's profile

AandCstyle

1613 posts in 1075 days


#8 posted 01-05-2013 01:48 AM

Ampeater, thank you!

-- Art

View TimStoltzfus's profile

TimStoltzfus

11 posts in 850 days


#9 posted 01-05-2013 08:21 PM

The only thing that I did differently from childress was that I glued up pairs of wedges together before doing a full quarter. This enabled me to joint the edges again(highly recommended). The more variables you can eliminate before gluing, the better. Finish is nothing more than butcher block oil. I am sorry I didn’t include a better description the first time.

View josh's profile

josh

928 posts in 1387 days


#10 posted 01-05-2013 08:21 PM

This is good.

-- Josh; Former Pennsylvanian, current Coloradan

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase