|Project by Tag84||posted 01-02-2013 10:33 PM||1375 views||0 times favorited||7 comments|
This was my first attempt at trying an endgrain board.
I first glued up 2 regular long grain cutting boards ( 4 seperate pieces total ), then cut them up again in pieces of 1.3 inch width ,crosscut.
I took a smooth board as a base to glue the strips together.
I wanted everything straight and square immediately after the glue-up, but noticed it was almost inposibble.
So i focused on just the top to be almost flush, and the sides were easy to square up on the tablesaw.
The board measures; length 12 inch x width 9.1 x height 3.2 inch.
Finished with tungoil.
Thanks for watching!
-- -Thomas -