LumberJocks Woodworking Forum banner

Project Information

I started this pencil having never turned one before, used an 18v drill to make the hole for the tubes (not a great idea by the way). The yellow heart at the top split before I finished it, so I used oak to finish out the tip side. I also left the oak a little thicker than usual mimicking the rubber grip that is on most pencils.

Gallery

Comments

· Registered
Joined
·
19,753 Posts
Nice work Josh.
 

· Registered
Joined
·
187 Posts
I like that shape. They usually all look alike to me
 
Top