LumberJocks

Cutting Board to be turned into a table

  • Advertise with us
Project by Dominic posted 12-28-2012 02:49 PM 1998 views 3 times favorited 14 comments Add to Favorites Watch
Cutting Board to be turned into a table
Cutting Board to be turned into a table No picture No picture No picture No picture No picture
Zoom Pictures

The plan is to turn this cutting board into a full size table. Nearly 7’ long, 30” wide and 1.75” thick. Just working out the details on a functional base at this time. Any ideas would be greatly appreciated.

Cheers,

Dominic

-- Dominic





14 comments so far

View chadgr's profile

chadgr

89 posts in 2382 days


#1 posted 12-28-2012 02:52 PM

I guess you mean make a larger cutting board with the same pattern for the table top.

-- Chad Griffiths Vist my Etsy Shop https://www.etsy.com/uk/shop/Everythingwood1?ref=si_shop

View atchison32's profile

atchison32

153 posts in 3083 days


#2 posted 12-28-2012 02:52 PM

Keep doing what you have been doing. Looks great!

View jbschutz's profile

jbschutz

545 posts in 2862 days


#3 posted 12-28-2012 02:55 PM

Dominic,
I must be missing something….if this piece is 1.75 inches thick, it isn’t 7 feet long or 30 inches wide. Is this a portion of the cutting board you plan to use?

-- jbschutz www.johnschutz.com

View Dominic's profile

Dominic

43 posts in 2504 days


#4 posted 12-28-2012 02:59 PM

I will be using this design, just on a grander scale. This particular cutting board is sitting on a customers counter top now and is the inspiration for the table, yet to be built.

-- Dominic

View Monte Pittman's profile

Monte Pittman

29947 posts in 2509 days


#5 posted 12-28-2012 05:10 PM

It’s a beauty, table should be as well.

-- Nature created it, I just assemble it.

View RibsBrisket4me's profile

RibsBrisket4me

1554 posts in 2676 days


#6 posted 12-28-2012 05:11 PM

The table would be awesome….and heavy :)

View Dominic's profile

Dominic

43 posts in 2504 days


#7 posted 12-28-2012 05:19 PM

Yes, it will be a tank of a table. The African Mahogany will counter the weight of the Black Walnut a bit. I am thinking Walnut legs/base. But, that will hinge on the support and ideas you all assist me with. It will be a conference room table, will never be moved, and have rolling chairs (think office building) around it.

Thanks LJ’s!

-- Dominic

View Grumpymike's profile

Grumpymike

2317 posts in 2486 days


#8 posted 12-28-2012 05:28 PM

7’ long and 1.75” thick?? yowza, yowza, you will lneed a stout base to hold that top securely in place and not be top heavy.
I will be looking forward to your post of the completed table and your choice of base.

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.

View a1Jim's profile

a1Jim

117268 posts in 3748 days


#9 posted 12-28-2012 05:55 PM

This will make a good looking table.

-- https://www.artisticwoodstudio.com/videos wood crafting & woodworking classes

View MonteCristo's profile

MonteCristo

2099 posts in 2359 days


#10 posted 12-28-2012 11:59 PM

Very handsome !

-- Dwight - "Free legal advice available - contact Dewey, Cheetam & Howe""

View Dusty56's profile

Dusty56

11822 posts in 3859 days


#11 posted 12-29-2012 01:29 AM

So most of the wider pieces will be 5+ inches wide x 7’ long…Are you hoping to get your 1.75 thickness out of 8/4 stock , or will you need to start with 10/4 ? Do you have the stock already ? Any estimates on the cost of the finished table ?
Did you make the board pictured above ?

-- I'm absolutely positive that I couldn't be more uncertain!

View Dominic's profile

Dominic

43 posts in 2504 days


#12 posted 12-29-2012 02:35 AM

@ Dusty56 – Yes the board above is one of mine. 8/4 stock will get me there with little trouble. My local mill lets me pick through the wood pile to find the best of the best. Price…well…it’s not going to be cheap. But, after some research it will still be a good deal for its new owner.

-- Dominic

View Sprice's profile

Sprice

3 posts in 2146 days


#13 posted 12-29-2012 02:39 AM

I love it I want my island in my kitchen to have that for a top

-- Skylar Price sprice@eidservpro.com

View Dominic's profile

Dominic

43 posts in 2504 days


#14 posted 12-29-2012 02:44 AM

Go for it Sprice! Just be sure to tune up those hand planes and card scraper!

-- Dominic

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com