or Join Now!
An LED lamp. An interesting design. Tell me if you like. Runs on 12V 2A. It has 12 LEDs
Dec 27, 2012
home | projects | blog
44 posts in 2084 days
Preview this project card
1258 posts in 2098 days
#1 posted 12-27-2012 09:10 PM
I like it—a lot. The angles are really pleasing and the arc at the end lightens the shape. Thanks for posting.
-- Mother Nature talks, I try to listen
114790 posts in 2845 days
#2 posted 12-27-2012 09:25 PM
Cool idea and super fine design .
-- http://artisticwoodstudio.com Custom furniture
#3 posted 12-27-2012 09:36 PM
Thanks for your feedback!
20094 posts in 1606 days
#4 posted 12-27-2012 09:37 PM
I like the uniqueness of it. Lots of potential for variations.
-- Mother Nature created it, I just assemble it.
245 posts in 1385 days
#5 posted 12-27-2012 09:49 PM
Don’t like it—- LOVE IT!!
Are the LEDs a strip or individually laid into the top?
Great idea and execution-
#6 posted 12-27-2012 10:07 PM
LEDs with adhesive tape, cut from 3
1120 posts in 2029 days
#7 posted 12-27-2012 10:19 PM
Great lamp. I’d be interested in knowing about the electronics side of the project. I know it’s not a topic concerning wood but I’m attempting to make a small LED lamp of my own.
-- Doug - Make an effort to live by the slogan "We try harder"
585 posts in 1342 days
#8 posted 12-27-2012 10:52 PM
+1….. I’d like to know a bit more about LED too.
-- Bill, central NY...no where near the "big apple"
333 posts in 1501 days
#9 posted 12-28-2012 01:46 AM
+2 Led wiring info wanted here as well. Does it have a transformer block that plugs in?Dimmable would be a plus as well.
-- Fine Custom Woodwork since 1978
91 posts in 1925 days
#10 posted 12-28-2012 02:07 AM
Wow, you just gave me some cool ideas (as if I needed another reason to run down to the shop)!
150 posts in 1269 days
#11 posted 12-28-2012 02:39 AM
Very, very cool idea.And here I was looking to buy a lamp to compliment my drawing table.Well done!
-- I cut it twice and it's still too short!
2477 posts in 2377 days
#12 posted 12-28-2012 02:52 AM
I bought an LED light set from CostCo for $30 that is adjustable for color and intensity, and is an 8 foot strip with sticky- back tape to apply it. I put it under a kitchen counter to light up the coffee service area. It used to have halogen lamps, and I burned (1st degree) my finger reaching for the switch awhile back, so I took it out immediately. My 85 year old MIL would have been seriously injured by that, based on her reflexes. On top of the nice light, the thing has a remote that you can use, so your fingers don’t have to hunt around under the cabinets. Very nice.
149 posts in 1366 days
#13 posted 12-28-2012 03:49 AM
I like it. It’s a cool design.
-- There is nothing like a Grateful Dead concert.
3437 posts in 3203 days
#14 posted 12-28-2012 03:50 AM
Alexi, I will 3rd or 4th the request for additional info regarding the electronic side of the lamp. I like the design and I have been trying to com up with a replacement entry table lamp. Something like this may be just the ticket.
-- Chris L. "Don't Dream it, Be it."- PortablePastimes.com (Purveyors of Portable Fun and Fidgets)
27 posts in 1956 days
#15 posted 12-28-2012 04:06 AM
Cool, great idea.
View all comments »
showing 1 through 15 of 24 comments
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics