or Join Now!
First attempt at zero gravity wine holderlast minute gift
home | projects | blog
39 posts in 1304 days
Preview this project card
20273 posts in 1641 days
#1 posted 12-22-2012 11:18 PM
Nice job. I still need to try these.
-- Mother Nature created it, I just assemble it.
114923 posts in 2880 days
#2 posted 12-22-2012 11:43 PM
clearly your not on the level :)) well done
-- http://artisticwoodstudio.com Custom furniture
3 posts in 1292 days
#3 posted 12-23-2012 12:47 AM
Nicely done…. I like the contrasting colors of wood used. What is the angle of the cut at the base of the holder?
#4 posted 12-23-2012 01:04 AM
The angle is 37 1/2 degrees and the hole is 1 1/2 inches for the bottle, Thanks
69 posts in 2084 days
#5 posted 12-23-2012 01:37 AM
Nice I would like to make some of these also. Does the hole need to be drilled at the same angle as the bottom cut?
#6 posted 12-23-2012 01:49 AM
No I drilled it straight through but I will try an angle next time
#7 posted 12-23-2012 01:58 AM
Thanks for the response. I tried to drill one with an angle and it didn’t end well. Your bottle turned out pretty level for having a straight cut hole.
76 posts in 1288 days
#8 posted 12-23-2012 03:17 AM
nice job I drilled mine on an angle and it works well
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics