LumberJocks Woodworking Forum banner

Project Information

Mom had a cheapo pastry board that she didn't really care for because it had a cleat on both surfaces but her rolling pin would hit the one on top at the back. It was starting to split and was a bit too small too. Lumberjock to the rescue with a new pastry board for Christmas. It's approximately 18"x24" made of rock maple slabs with strips of cherry on the sides (tongue & groove) and a cherry cleat. I glued and pocket screwed the cleat. Thanks to the guys at Pavlik Hardwoods in Merril, Mi for running it through their wide belt sander to make it super flat and save me an entire day of sanding. Finish is a water based poly.

Gallery

Comments

· Registered
Joined
·
19,753 Posts
Good Idea Matt a really cool job
 

· Registered
Joined
·
12 Posts
Nice Cue, if you're ever stuck for that sander in SW MI, just stop on by, can run it through my sander….LOLO
 

· In Loving Memory
Joined
·
2,980 Posts
Great work! You have given me some ideas to work with!
 

· Registered
Joined
·
7,502 Posts
Looks like a good-en
 

· Registered
Joined
·
499 Posts
What a great idea!!

Thanks for sharing
 

· Registered
Joined
·
169 Posts
Cool idea. Mom should be very happy with this one.
 
Top